Cost-effective two-dimensional rank-order filters on FPGAs
Here's how to use FPGAs as co-, pre-, and post-processing hardware acceleration solutions for video and imaging.
Vendor:
NTLab
Category:
Filters
6.5 to 23 MHz 3rd order low pass filter
Low pass filter (3rd order Chebyshev filter) is based on the gyrators with cut-off frequency adjustment in wide range (6.5…23 MHz…
Overview
Low pass filter (3rd order Chebyshev filter) is based on the gyrators with cut-off frequency adjustment in wide range (6.5…23 MHz ). There are two modes for cut-off frequency programming: manually and automatically. The generator is used to adjust filter cut-off (CO) frequency in automatic mode. Also CO frequency can be fixed manually.
Current consumption is 1.32 mA.
Key features
- TSMC BiCMOS SiGe 180 nm
- Wide cut-off frequency adjustment range (6.5 MHz…23 MHz)
- Low pass filter cut-off frequency adjustment system
- Portable to other technologies (upon request)
Block Diagram
180TSMC_LPF_03 block diagram
Applications
- Receivers
What’s Included?
- Schematic or NetList
- Abstract model (.lef and .lib files)
- Layout view (optional)
- Behavioral model (Verilog)
- Extracted view (optional)
- GDSII
- DRC, LVS, antenna report
- Test bench with saved configurations (optional)
- Documentation
Silicon Options
| Foundry | Node | Process | Maturity |
|---|---|---|---|
| TSMC | 180nm | BCDG2 | Silicon Proven |
Specifications
Identity
Part Number
180TSMC_LPF_03
Vendor
NTLab
Type
Silicon IP
Files
Note: some files may require an NDA depending on provider policy.
Provider
HQ:
Lithuania
Learn more about Filters IP core
Understanding cascaded integrator-comb filters
The previously obscure CIC filter is now vital to many high-volume wireless communications tasks and equipment. Using CIC filters can cut costs, improve reliability, and help performance. Here's a primer to get you started.
Revisiting the analogue video decoder: Brushing up on your comb filters
With such a large number of video decoders in the market it might seem an unnecessary indulgence to spend time looking again at the design of this fundamental but apparently obsolete building block, and certainly new designs are not appearing on the market and haven't done so for three or four years.
Opto-electronics -> Passive filters upgrade jitter testing
Opto-electronics -> Passive filters upgrade jitter testing
Ensuring reliability in Advanced IC design
To complete our task as engineers we rely on the tools we use. We collaborated with Siemens EDA solutions back in 2025 on a webinar about how we use their tools to develop our designs and layouts.
The Architectural Evolution of 16GHz PLLs for Next-Gen AI and SerDes SoCs
This article outlines Key ASIC R&D team's upcoming PLL suitable for high-speed SerDes having ultra low jitter with LC- tank VCO, and supporting up to 16 GHz output clock to sample the data.
Frequently asked questions about filter IP cores
What is 6.5 to 23 MHz 3rd order low pass filter?
6.5 to 23 MHz 3rd order low pass filter is a Filters IP core from NTLab listed on Semi IP Hub. It is listed with support for tsmc Silicon Proven.
How should engineers evaluate this Filters?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Filters IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.