USB On-The-Go IP

Welcome to the ultimate USB On-The-Go IP hub! Explore our vast directory of USB On-The-Go IP
All offers in USB On-The-Go IP
Filter
Filter

Login required.

Sign in

Login required.

Sign in

Compare 66 USB On-The-Go IP from 14 vendors (1 - 10)
  • USB 2.0 PHY For On-The-Go Controller
    • Complies with USB specifications, rev. 2.0 and 1.1
    • Complies with UTMI+ specification, level 3, rev. 1.0
    • Supports OTG USB 2.0
    • Supports 480Mb/s (HS), 12Mb/s (FS) and 1.5MB/s (LS) serial data transmission rates
    Block Diagram -- USB 2.0 PHY For On-The-Go Controller
  • USB 2.0 On-The-Go Controller
    • High speed support: 480 Mbit/s
    • Full speed support: 12 Mbit/s
    • USB 2.0 Compliant
    • High/Full speed support using 8/16 bit UTMI/ULPI interface
    Block Diagram -- USB 2.0 On-The-Go Controller
  • USB 2.0 PHY IP, Silicon Proven in UMC 40LP
    • Compliant with USB2.0 and USB1.1 specification
    • Compliant with UTMI Specification Version level 3.
    • Supports HS(480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
    • All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
    Block Diagram -- USB 2.0 PHY IP, Silicon Proven in UMC 40LP
  • USB 3.0 PHY IP, Silicon Proven in UMC 40SP
    • Compliant with Universal Serial Bus 3.0 Specification
    • Supports 2.5GT/s and 5.0GT/s serial data transmission rate
    • Compliant with PIPE 3.0
    • Compliant with Universal Serial Bus 2.0 Specification
    Block Diagram -- USB 3.0 PHY IP, Silicon Proven in UMC 40SP
  • USB 2.0 PHY IP, Silicon Proven in SMIC 40LL
    • Compliant with USB2.0 and USB1.1 specification
    • Compliant with UTMI Specification Version level 3.
    • Supports HS (480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
    • All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
    Block Diagram -- USB 2.0 PHY IP, Silicon Proven in SMIC 40LL
  • USB 2.0 PHY IP, Silicon Proven in SMIC 55LL
    • Compliant with USB2.0 and USB1.1 specification
    • Compliant with UTMI Specification Version level 3.
    • Supports HS (480Mbps)/FS(12Mbps) /LS(1.5Mbps) modes
    • All required terminations, including 1.5Kohm pullup on DP and DM, and 15Kohm pull-down on DP and DM are internal to chip
    Block Diagram -- USB 2.0 PHY IP, Silicon Proven in SMIC 55LL
  • USB 3.0 PHY IP, Silicon Proven in TSMC 28HPC+
    • Compliant with Universal Serial Bus 3.0 Specification
    • Supports 2.5GT/s and 5.0GT/s serial data transmission rate
    • Compliant with PIPE 3.0
    • Compliant with Universal Serial Bus 2.0 Specification
    Block Diagram -- USB 3.0 PHY IP, Silicon Proven in TSMC 28HPC+
  • USB 3.1 SuperSpeed Dual-Role Device Controller (USB-IF Certified)
    • USB-IF Certified full-feature Dual Role Device Controller solution
    • Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
    • Compliant with USB 3.1 specification revision 1.0 with latest ECNs
    • Compliant with xHCI specification revision 1.1
    Block Diagram -- USB 3.1 SuperSpeed Dual-Role Device Controller (USB-IF Certified)
  • USB 3.1 SuperSpeed Device Controller (USB-IF Certified)
    • USB-IF Certified full-feature Device Controller solution
    • Next generation USB controller architecture producing the smallest size, lowest power, and maximum configurability
    • Compliant with USB 3.1 specification revision 1.0 with latest ECNs
    • Compliant with xHCI specification revision 1.1
    Block Diagram -- USB 3.1 SuperSpeed Device Controller (USB-IF Certified)
  • USB 3.0 OTG High / Full / Low- Speed Dual Role IP Core
    • Support SW controlled host/device role switching.
    • Support Superspeed, Highspeed and Fullspeed
    • Support Control, Bulk, Interrupt and Isochronous Transfer Types
    • Support U1/U2/U3 power saving modes for USB 3.x port
    Block Diagram -- USB 3.0 OTG High / Full / Low- Speed Dual Role IP Core
×
Semiconductor IP