Low-Speed Control Interface IP cores provide the communication, control, monitoring, and management functions required by modern SoCs, microcontrollers, automotive systems, industrial equipment, and embedded platforms. These interfaces enable reliable connectivity between processors, sensors, peripherals, power-management devices, and external subsystems.
This catalog includes IP solutions for widely adopted control and management protocols such as I2C/I3C, SPI/QSPI/xSPI, UART, CAN, CAN FD, CAN XL, LIN, GPIO, IEEE 1588/PTP, MIPI RFFE, PMBus, Smartcard, ARINC 429, MIL-STD-1553, FlexRay, SENT, HDLC, and other specialized interfaces. Compare controller, target, and protocol IP offerings from multiple vendors based on standards compliance, feature sets, safety support, performance, and integration requirements.
CAN FD Controller DO-254 IP Core
The CAN FD Controller implements a Controller Area Network as specified in the ISO 11898:2015 Part 1, supporting both Classical a…
Protocol controller IP for Classical CAN / CAN FD / CAN XL
The X_CAN is the new CAN Communication Controller IP supporting CAN XL protocol.
The Universal Asynchronous Receiver/Transmitter (UART) is a hardware device that translates data between parallel and serial form…
The SPI Slave IP Core implements an SPI Slave fully compliant to the SPI Standard (Motorola’s M68H11 Reference Manual).
The SPI Master IP Core implements an SPI Master fully compliant to the SPI Standard (Motorola’s M68H11 Reference Manual).
The I2C Slave IP Core implements an I2C Slave fully compliant to the I2C-bus specification and user manual Rev.
The I2C Master IP Core implements an I2C Master fully compliant to the I2C-bus specification and user manual Rev.
ARINC 429 Transmitter DO-254 IP Core
The ARINC 429 Tx IP Core implements a transmitter as specified in the ARINC Specification 429 Part 1-17.
MIL-STD-1553C Remote Terminal DO-254 IP Core
The MIL_1553 RT IP Core implements a Remote Terminal as specified in the MIL-STD-1553C specification.
ARINC 429 Receiver DO-254 IP Core
The ARINC 429 Rx IP Core implements a receiver as specified in the ARINC Specification 429 Part 1-17.
The CAN Controller implements a Controller Area Network as specified in the ISO 11898 Part 1 and in the CAN Specification Version…
ARINC-429 is a popular and ubiquitous data transfer standard for aircraft avionics systems.
The I²C slave IP is fully synthesizable core and compatible with Phillips I²C standard.
Synchronous Serial Interface (SSI) IP
Dolphin Technology provides Synchronous Serial Interface (SSI) IP which is an interface that is being used with absolute value tr…
Dolphin Technology provides Quad SPI Controller IP which enables access to a QSPI flash device through read, write and erase oper…
The Octa SPI Controller and PHY IP supports the fastest access frequency of 200MHz, with DDR Mode and Double Transfer Rate (DTR) …
DTI I3C Controller provides the logic consistent with NXP I3C specification to support the communication of low-speed integrated …
Multi Protocol Synchronous Serial Engine IP
The developed IP integrates basic serial interface protocols like UART, SPI and I2C into a single AXI interface port.
SPI and Efuse - GlobalFoundries 130nm RFSOI
SPI and Efuse - GlobalFoundries 130nm RFSOI
CAN FD controller compatible with both CAN 2.0 and CAN FD
GRCANFD is a CAN IP core implementing a CAN-FD controller compatible with both CAN 2.0 and CAN FD.