USB 3.0 femtoPHY in GF (28nm, 12nm)
The Synopsys USB-C™ 3.0 and USB 3.0 femtoPHY IP provide designers with a physical (PHY) layer IP solution for low-power mobile an…
High-voltage solutions in baseline GlobalFoundries and multi-foundry technologies
Certus is pleased to offer High-voltage ESD solutions across multiple baseline technologies.
10 to 200 MHz DLL-based frequency multiplier
DLL-based frequency multiplier is a simple to configure and operate block, combining, small area and low current consumption.
XRF018BCDLFLASH_16K8 is a BCD compatible embedded non-volatile memory IP with 16K8 ROM density.
IEEE 802.11ah Wi-Fi HaLow RF Transceiver
Orca’s ultra-low power ORC8050 Wi-Fi 802.11ah transceiver is designed for small, low-power battery-operated, extended range IoT a…
GF 55nm LPe, 8-ch, 12-bit 1MSPS Low-power SAR ADC
The L7GAD12B001M IP is a successive– approximation-register (SAR) type analog-to-digital converter (ADC), which consists of an 8-…
GF 65nm LPe, 8-ch, 12-bit 1MSPS Low-power SAR ADC
The L6GAD12B001M IP is a successive– approximation-register (SAR) type analog-to-digital converter (ADC), which consists of an 8-…
Bandgap voltage reference (output voltage 0.4 V)
The bandgap voltage reference generates temperature-compensated voltage due to mutual compensation of temperature dependence of b…
30 mA flash LDO voltage regulator (output voltage 1.8 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider.
GF 55nm LPe, 8-ch, 10-bit 1MSPS Low-power SAR ADC
The L7GAD10B001M IP is a successive–approximation-register (SAR) type analog-to-digital converter (ADC), which consists of an 8-c…
GF55nm LPe, 10-bit, 250MHz Video DAC
The L7GDA10B250M IP is high-speed Digital-to-Analog Converter (DAC), optimized for high dynamic performance with low power consum…
30 mA LDO voltage regulator (output voltage 0.9 to 1.3 V)
055GF_LDOVR_03 the voltage regulator is used to maintain a stable output voltage at varying input voltage.
2 mA LDO voltage regulator (output voltage 1.2 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider.
IP is a low power high resolution RC oscillator nominally operates at 100 MHz output clock from a 1.2 V supply.
IP is a low power high resolution RC oscillator nominally operates at 10 MHz output clock from a 1.2 V supply.
The block consists of voltage detector, power on reset and NOR3 gate.
IP is a low power high resolution RC oscillator nominally operates at 1.024 MHz output clock from a 1.2 V supply.
Output Buffer for up to 12Gb/s
The PMCC_OBUF12G is a differential CML 50Ω terminated output driver for datarates from DC up to 12Gb/s.
Low noise from 8GHz to 11.3GHz differential LC VCO
PMCC_VCOMB12G is a low noise multi-band differential LC voltage controlled oscillator (VCO).
45SPCLO UCIe-Class 1-32Gbps Low Power Receiver IP (NRZ)
UCIe-Class receiver macro on GF 45SPCLO technology node supporting from 1 to 32Gbps with 70mV sensitivity