Vendor: Packet Architects AB Category: Ethernet

Ethernet Switch TSN 20x1G + 4x5G

Ethernet Switch TSN 20x1G + 4x5G

Key features

  • 20 ports of 1 Gigabit Ethernet.
  •  4 ports of 5 Gigabit Ethernet.
  •  Full wire-speed on all ports and all Ethernet frame sizes.
  •  Store and forward shared memory architecture.
  •  Support for jumbo packets up to 32749 bytes.
  •  Passes maximum overlap mesh test (RFC2899) using all ports for all packet sizes up to 1518 bytes.
  •  Time-Sensitive Networking:
    •  IEEE Std 802.1Qci-2017: Per-Stream Filtering and Policing
    •  IEEE Std 802.1CB-2017: Frame Replication and Elimination for Reliability
    •  IEEE Std 802.1Qbv-2015: Enhancements for Scheduled Traffic
    •  IEEE Std 802.1Qav-2009: Credit Based Shaper
  •  Queue management operations:
    •  Disable scheduling of packets on a port.
    •  Disable queuing new packets to a port.
    •  Allow a port to be drained without sending out packets.
    •  Allow checking if a port is empty or not.
  •  Input and output mirroring.
  •  RSPAN - Remote Switch Port Analyzer
  •  4 source MAC address ranges with a number of different actions.
  •  4 destination MAC address ranges with a number of different actions.
  •  1,024 entry L2 MAC table, hash based 4-way.
  •  4,096 entry VLAN table.
  •  16 entry synthesized CAM to solve hash collisions.
  •  4 entries of the synthesized CAM are fully maskable.
  •  64 entry L2 multicast table.
  •  Automatic aging and wire-speed learning of L2 addresses. Does not require any CPU/software intervention.
  •  Spanning tree support, ingress and egress checks.
  •  16 multiple spanning trees, ingress and egress checks.
  •  Egress VLAN translation table allowing unique VID-to-VID translation per egress port.
  •  VLAN priority tag can bypass VLAN processing and be popped on egress. 
  •  496 entries of ingress classification / ACL Lookups. The classification / ACL keys are configurable for each source port and the fields are selected from a incoming packets L2, L3 or L4 fields. The selection is described in 10.2 The classificaiton / ACL key can be up to 372 bits long. The classification / ACL lookup is based on a combination of hash and TCAM. The actions which can be done is listed below:
    •  Multiple actions can be assigned to each result. All results can be done in parallel if the user so wishes.
    •  Result action can be to drop a packet.
    •  Result action can be to send a packet to the CPU port.
    •  Result action can be to send a packet to a specific port.
    •  Result action can be to update a counter. There are 32 counters which can be used by the classification / ACL engine.
    •  Result action can be to force packet to a specific queue on a egress port.
    •  Result action can be to assign a meter/market/policer to measure the packet bandwidth.
    •  Result action can be to assign a color to the packet which is used by the meter/marker/policer.
    •  Result action can be to force the packet to use a specific VID when doing the VLAN table lookup.
    •  Result action can be to do a input mirror on a packet.
    •  Result action can be to not allow the packet to be learned in L2 MAC table.
  •  The ingress configurable classification / ACL engine can use the type and code fields from ICMP frames.
  •  The ingress configurable classification / ACL engine can use the fields, including the group address, from IGMP frames.
  •  1843200 bits shared packet buffer memory for all ports divided into 1536 cells each of 150 bytes size
  •  8 priority queues per egress port.
  •  Configurable mapping of egress queue from IP TOS, MPLS exp/tc or VLAN PCP bits.
  •  32 ingress admission control entries.
  •  Deficit Weighted Round Robin Scheduler.
  •  Bandwidth shapers per port.
  •  Individual bandwidth shapers for each priority on each port.
  •  Individual bandwidth shapers for each queue on each port.
  •  Egress queue resource limiter with four sets of configurations.
  •  Configuration interface for accessing configuration and status registers/tables.
  •  Multicast/Broadcast storm control with separate token buckets for flooding, broadcast and multicast packets.
  •  Multicast/Broadcast storm control is either packet or byte-based, configurable per egress port.
  •  LLDP frames can optionally be sent to the CPU.
  •  Attack prevention by TCP flag rules combined with TCP-port and IP address checks, this also includes IMCP length attack checks.

Block Diagram

Ethernet Switch TSN 20x1G + 4x5G block diagram

Specifications

Identity

Part Number
Ethernet Switch TSN 20x1G + 4x5G
Vendor
Packet Architects AB
Type
Silicon IP

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Provider

Learn more about Ethernet IP core

Cambium Networks choses FlexSwitch IP for their PTP 700 platform

Packet Architects AB, a provider of FPGA/ASIC networking IP, today announced that Cambium Networks™, a leading global provider of wireless broadband solutions, chose their FlexSwitch Ethernet switch IP for the PTP 700 series of wireless backhaul products

Frequently asked questions about Ethernet IP cores

What is Ethernet Switch TSN 20x1G + 4x5G?

Ethernet Switch TSN 20x1G + 4x5G is a Ethernet IP core from Packet Architects AB listed on Semi IP Hub.

How should engineers evaluate this Ethernet?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Ethernet IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP