Vendor: Synopsys, Inc. Category: Single-Protocol PHY

USB4 PHY in Samsung (SF4X)

The USB4 IP solution is based on the USB4 specification from the USB Implementer Forum (USB-IF).

Overview

The USB4 IP solution is based on the USB4 specification from the USB Implementer Forum (USB-IF). The USB4 IP offering includes device router, controllers, PHYs with support for the USB Type-C™ connectivity specification, and verification IP. These elements enable quick development of advanced chip designs incorporating the 20 Gbps and 40 Gbps USB4 standard.
The USB4 IP is targeted for integration into SoCs for edge AI, mass storage devices, PCs, and tablets. The USB4 PHY, Router and Controller IP allow designers to maximize power efficiency for extended battery life. The  USB4 IP enables the fastest USB data transfer speeds while lowering overall power consumption.
As the leading supplier of USB IP, Synopsys provides designers with a high- performance, low-power, and area-efficient IP solution, for cost-effective integration into system-on-chip designs. 

Key features

  • Supports 40 Gbps, 20 Gbps, 10 Gbps, and 5 Gbps data rates
  • x1 and x2 configurations (USB 3.2 and USB 3.1 PHY only)
  • Low active and standby power
  • Small area for low silicon cost
  • USB Type-C connectivity support available (external party Type-C Port Controller not included)
  • Designed for advanced process nodes (12nm and below)

Benefits

  • Supports USB4, USB 3.2, DisplayPort with HDCP 2.3 security, PCI Express, and Thunderbolt 3 connectivity protocols through USB Type-C connectors and cables
  • Supports USB4 20Gbps and USB4 40Gbps
  • Supports USB 3.2 SuperSpeed and Enhanced SuperSpeed: Gen 1 at 5 Gbps, Gen 2 at 10 Gbps, and Gen 2x2 at 20 Gbps
  • Multi-lane operation for USB4 and USB 3.2 peripherals
  • Backwards compatible to previous Synopsys USB controllers to leverage existing drivers
  • DesignWare USB4 PHYs, routers, and controllers offer high-performance throughput
  • USB4 router IP tunnels USB, PCIe and DisplayPort protocol traffic while optimizing bandwidth
  • Supports PIPE and UTMI+ PHY interfaces
  • Architectural features reduce power consumption

Applications

  • Mass storage devices
  • Artificial intelligence edge devices
  • Display and docking applications
  • Cloud computing
  • Automotive applications

What’s Included?

  • GDSII
  • LEF
  • LIB
  • Simulation model
  • Testbench
  • Databook

Specifications

Identity

Part Number
dwc_usb4phy_samsung
Vendor
Synopsys, Inc.
Type
Silicon IP

Standards & Interfaces

Supported Standards
USB4

Files

Note: some files may require an NDA depending on provider policy.

Provider

Learn more about Single-Protocol PHY IP core

Industry 1st CXL 4.0 Verification IP: Transforming AI and HPC Systems

Synopsys continues to lead innovation with the industry’s first commercially available CXL 4.0 Verification IP (VIP). This comprehensive solution supports the full 128 GT/s data rate, IO throttling, and streamlined port negotiation, equipping designers to validate and optimize their products for the future.

How Ultra Ethernet And UALink Enable High-Performance, Scalable AI Networks

This article delves into the technical aspects of how scaling up and out is becoming a critical need for HPC and AI chip developers, and how new standards such as Ultra Ethernet and Ultra Accelerator Link (UALink) aim to tackle the challenges of high-bandwidth, low-latency connectivity and efficient resource management.

Maximizing Performance & Reliability for Flash Applications with Synopsys xSPI Solution

Systems using SoCs designed in advanced processes generally rely on external Flash devices that use NOR/NAND Flash memory technology for non-volatile storage. NOR Flash memory offers many benefits for device manufacturers and consumers, such as faster reading, low power consumption, and smaller area. In contrast, NAND Flash memories are ideal for applications such as data storage, where higher memory capacity and faster write and erase operations are required.

Frequently asked questions about Single-Protocol PHY IP

What is USB4 PHY in Samsung (SF4X)?

USB4 PHY in Samsung (SF4X) is a Single-Protocol PHY IP core from Synopsys, Inc. listed on Semi IP Hub.

How should engineers evaluate this Single-Protocol PHY?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Single-Protocol PHY IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP