Vendor: Dolphin Semiconductor Category: DC/DC Converter

Nano power DC-DC converter in GF 22FDX with ultra-low quiescent current and high efficiency at light load

Nano power DC-DC converter in GF 22FDX with ultra-low quiescent current and high efficiency at light load

Contact Provider Request Datasheet
GlobalFoundries 22nm FDX Pre-Silicon View all specifications

Overview

Nano power DC-DC converter in GF 22FDX with ultra-low quiescent current and high efficiency at light load

Key features

  • "Ultra-low quiescent current (300 nA) to ensure minimum current consumption in deep sleep / hibernation mode
  • High efficiency at light load to extend battery lifetime (75% @ 10 uA)
  • Low ripple value to supply noise sensitive and RF loads
  • 1 uH inductor
  • Ultra-small area for reduced silicon cost
  • Configurable output current (depending on application requirements)"

Silicon Options

Foundry Node Process Maturity
GlobalFoundries 22nm FDX Pre-Silicon

Specifications

Identity

Part Number
DCDC-ULP-22FDX-1.8-5.5-0.5-3.3.01_GF_22_FDX
Vendor
Dolphin Semiconductor
Type
Silicon IP

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Provider

Contact Dolphin Semiconductor

Learn more about DC/DC Converter IP core

Breaking new energy efficiency records with advanced power management platform

The free lunch offered for decades by Moore’s law is now over and scaling down to the next technology node no longer offers the required energy efficiency gains. Design teams must now pursue their gains by deploying increasingly complex power management techniques to meet the demands of the new IoT markets.

Pairing Sensitive RF with Voltage Regulators for Noise-Free IoT Modules

This article presents the challenge of pairing an RF analog circuit with the appropriate inductor-based embedded Switching Regulator (namely eSR, equivalent to on-board DC/DC) allowing to meet both the power efficiency requirements and the module performance level at the same time.

Guide to Choosing the Best DCDC Converter for Your Application

This white paper introduces a procedure for choosing the proper DCDC switching converter for a given application. It explains basic, performance, and optional metrics in detail. It also demonstrates other practical aspects that are sometimes overlooked by system designers. Multiple application examples are provided.

How to simplify switch-mode DC-DC converter design

This article focuses on the design issues that are simplified by including an integrated inductor optimized for a range of electrical and layout applications as part of the power management solution

Frequently asked questions about DC-DC Converter IP cores

What is Nano power DC-DC converter in GF 22FDX with ultra-low quiescent current and high efficiency at light load?

Nano power DC-DC converter in GF 22FDX with ultra-low quiescent current and high efficiency at light load is a DC/DC Converter IP core from Dolphin Semiconductor listed on Semi IP Hub. It is listed with support for globalfoundries Pre-Silicon.

How should engineers evaluate this DC/DC Converter?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this DC/DC Converter IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP