Vendor: TES Electronic Solutions Category: DC/DC Converter

Switched Capacitor 3.6V Boost-Buck DC-DC Converter

DC-DC Switched Capacitor Boost-Buck Converter IP in X-FAB XC018-0.18µm CMOS

32 GBbps X-FAB 180nm XC018 Available on request View all specifications

Overview

The TS_SWC_DCDC_3V6_X8 is a switching-mode power converter that regulates its output voltage to typically 3.6V with an output load current of 10mA, from an input voltage VBAT ranging from 2.5V to 5.5V. The DC-DC converter architecture is based on the switched capacitor design which provides multiple advantages such as being inductor less (better EMI performance), suitable for low current applications, and saving PCB area and BOM.

Voltage regulation scheme depends on pulse skipping modulation (PSM) where an oscillator frequency of approximately 32kHz is used.

A bandgap voltage is used as a reference voltage for the comparison inside the PSM control loop. The DC DC converter is capable of switching from buck to boost automatically as a comparator monitors the output voltage and switches into the appropriate state.

The TS_SWC_DCDC_3V6_X8 provides its regulated output voltage in the temperature range from -40°C to 60°C.

The circuit is silicon proven and already part of the building blocks of well-known products in the market.

Technology: X-FAB XC018-0.18µm CMOS process

 OPERATING CONDITIONS

Parameters Values / Type
Junction temperature range -40ºC up to +60ºC
Supply voltages with respect to ground VBAT: 2.5V up to 5.5V
Maximum DC load current intensity 10mA

SPECIFICATION

Parameters Values / Type
Output regulated voltage 3.6V
Switching frequency 32.768kHz
Line Regulation 157mV/V
Load Regulation 168mV/V

 

Block Diagram

Silicon Options

Foundry Node Process Maturity
X-FAB 180nm XC018 Available on request

Specifications

Identity

Part Number
TS_SWC_DCDC_3V6_X8
Vendor
TES Electronic Solutions
Type
Silicon IP

PPA

Throughput
32 GBbps

Files

Note: some files may require an NDA depending on provider policy.

Provider

Learn more about TES' DC-DC IP core

Frequently asked questions about DC-DC Converter IP cores

What is Switched Capacitor 3.6V Boost-Buck DC-DC Converter?

Switched Capacitor 3.6V Boost-Buck DC-DC Converter is a DC/DC Converter IP core from TES Electronic Solutions listed on Semi IP Hub. It is listed with support for x-fab Available on request.

How should engineers evaluate this DC/DC Converter?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this DC/DC Converter IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP