Overview
An IEEE 802.3u compliant single-port Ethernet physical layer transceiver with low power consumption for 10BASE-Te and 100BASE-TX operation is known as an Ethernet PHY. The EPHY links to the Media Access Control Layer (MAC) through the Giga Media Independent Interface (GMII), and on the media side, it offers a direct interface to either UTP5/UTP3 cable for 10BASE-Te Ethernet or Unshielded Twisted Pair Category 5 Cable (UTP5) for 100BASE-TX Fast Ethernet. The CMOS technology used by the Ethernet PHY has low power and great performance. The Physical Coding Sub-layer (PCS), Physical Medium Attachment Layer (PMA), and Twisted Pair Physical Medium Dependent Sub-layer are all included, as per the 100BASE-TX physical layer functionality as specified by IEEE802.3u (TP-PMD, 100BASE-TX only). Additionally, the EPHY has a powerful auto-negotiation feature that uses automated media speed/duplex and protocol selection matching.
Provider
T2M GmbH is the leading Global Technology Company supplying state of the art complex semiconductor connectivity IPs and KGDs, enabling the creation of complex connected devices for Mobile, IoT and Wearable markets.
T2M's unique SoC White Box IPs are the design database of mass production RF connectivity chips supporting standards including Wifi, BT, BLE, Zigbee, NFC, LTE, GSM, GNS. They are available in source code as well as KGD for SIP / modules.
With offices in USA, Europe, China, Taiwan, South Korea, Japan, Singapore and India, T2M’s highly experienced team provides local support, accelerating product development and Time 2 Market.
Learn more about Single-Protocol PHY IP core
UniversalFlash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniPro as well as eMMC form factors to simplify adoption and development.
In this paper, we introduce a new high-level, dataflow programming language called C~ (“C flow”) that further increases productivity by raising the level of abstraction from behavioral descriptions, while overcoming the limitations of C for hardware design. We present the syntax and semantics of this language, and the framework that provides hardware and software code generation. This paper illustrates the benefits of using C~ for hardware design of a IEEE 802.3 MAC, synthesized for FPGA and for 90nm CMOS technology.
Universal Flash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniProSM as well as eMMC form factors to simplify adoption and development.
Since MIPI and MDDI standards both target interfaces to cameras and displays on mobile devices, are two separate standards really needed?
Enter the Inner Sanctum of RapidIO: Part 1
Networking software key to PICMG 2.16 optimization
