Vendor: Naneng Microelectronics Category: Multi-Protocol PHY

0.6G - 12.5G Universal SerDes

0.6G - 12.5G Universal SerDes

Key features

  • 0.6Gbps to 12.5Gbps universal SERDES IP
  • Support full, 1/2, 1/4 and 1/8 data rate mode
  • Support up to 12 TX/RX data lanes with shared PMU
  • Fractional PLL for wide data rate range selection
  • 32bit/40bit selectable parallel data bus
  • Independent channel power down control
  • Programmable transmit amplitude
  • Three taps configurable FFE up to 10dB boost
  • Embedded adaptive receiver linear equalizer
  • Perspective DFE module in receiver
  • Build in self-test with PRBS and user pattern generation and checking
  • Integrated on-die termination
  • Support receiver detection
  • Support OOB signal generation and detection
  • Support 5000ppm Spread Spectrum Clock generation and receiving
  • Flexible reference clock frequency range, both single-end and differential
  • Do not need any external component
  • Eye monitoring facility available
  • FCBGA Package support
  • ESD: HBM/MM >2000V/200V
  • Protocol Support
    • CEI 6G&11G SR/MR
    • XAUI/CAUI/XAUI
    • GPON/EPON/10G EPON/XGPON/XGSPON
    • SGMII/HSGMII/QSGMII/USGMII
    • XFI
    • Serial RapidIO 1.0/2.0/3.0
    • CPRI 0.6144G/1.2288G/2.4576G/4.9152G/6.144G/9.8304G
    • PCIE Gen1/Gen2/Gen2

Specifications

Identity

Part Number
SerDes IP
Vendor
Naneng Microelectronics
Type
Silicon IP

Files

Note: some files may require an NDA depending on provider policy.

Provider

Learn more about Multi-Protocol PHY IP core

How a 16Gbps Multi-link, Multi-protocol SerDes PHY Can Transform Datacenter Connectivity

Increasingly, more of the focus on mobile has centered around cloud datacenters and the networking to get the data back and forth between these datacenters and the mobile device. Functions like voice recognition and mapping depend on the ability to split the functionality between the smartphone, for local processing like encryption and compression, and the back end, where a large number of servers can do the heavier lifting before returning the results.

One PHY, Zero Tradeoffs: Multi-Protocol PHY for Edge AI Interface Consolidation

The Cadence 10G multi-protocol PHY was architected to address this exact challenge. Designed to scale across multiple process nodes, it consolidates PCI Express (PCIe), USB, DisplayPort, Ethernet, and other interfaces into a single, compact, silicon-efficient block. What sets it apart is simultaneous multi-protocol support, which enables multiple data paths without duplicating hardware, requiring extra board connectors, or paying the area and power penalty of separate IP blocks.

Frequently asked questions about Multi-Protocol PHY IP cores

What is 0.6G - 12.5G Universal SerDes?

0.6G - 12.5G Universal SerDes is a Multi-Protocol PHY IP core from Naneng Microelectronics listed on Semi IP Hub.

How should engineers evaluate this Multi-Protocol PHY?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Multi-Protocol PHY IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP