Video and image processing design using FPGAs
FPGAs are an ideal fit for video and image processing applications where there is a need to have a scalable solution for improving cost, performance, and flexibility while meeting time-to-market goals.
By Brian J. Jent, Altera Corp.
Courtesy of Video/Imaging DesignLine (07/07/2006 0:40 AM EDT)
New trends in video and image processing are forcing developers to re-examine the design architectures they have used previously when considering the numerous tradeoffs of using different architectures that are key to the decision process.
Consumer demand and exciting innovations, such as HDTV and digital cinema, revolve around video and image processing and the rapid evolution of the technology. Major advancements in image capture and display resolutions, advanced compression techniques, and video intelligence are the driving forces behind these technological innovations. At the same time, rapid change in standards and higher resolutions are pushing designers away from off-the-shelf technology.
Resolutions in particular have increased dramatically in just the last few years. The following table illustrates current state-of-the-art resolutions in different end types of applications.
By Brian J. Jent, Altera Corp.
Courtesy of Video/Imaging DesignLine (07/07/2006 0:40 AM EDT)
New trends in video and image processing are forcing developers to re-examine the design architectures they have used previously when considering the numerous tradeoffs of using different architectures that are key to the decision process.
Consumer demand and exciting innovations, such as HDTV and digital cinema, revolve around video and image processing and the rapid evolution of the technology. Major advancements in image capture and display resolutions, advanced compression techniques, and video intelligence are the driving forces behind these technological innovations. At the same time, rapid change in standards and higher resolutions are pushing designers away from off-the-shelf technology.
Resolutions in particular have increased dramatically in just the last few years. The following table illustrates current state-of-the-art resolutions in different end types of applications.
To read the full article, click here
Related Semiconductor IP
- TSMC 7nm 0V75 / 0V9 ESD Local Clamp – Low Cap
- TSMC 65nm 3V3 ESD Local Clamp – Rad Hard
- TSMC 5nm 1V8, 1.2V and 0.9V ESD Local Protection – Low Cap
- TSMC 3nm 3V3 ESD Local Clamp
- TSMC 3nm 1V2 ESD Local Clamp – Low Capacitance
Related Articles
- Using vector processing for HD video scaling, de-interlacing, and image customization
- Video and image processing design using FPGAs
- Implementing digital processing for automotive radar using SoC FPGAs
- Designing low-power video image stabilization IP for FPGAs
Latest Articles
- LACE: Large Language Model Aided Multi-Agent Framework for Agile RISC-V Instruction Extension
- A Process-Aware Hybrid Si/IGO Monolithic-3D 6T SRAM with BEOL Pass-Gates for the 2nm Node
- Automated Estimation of MBIST Area and Test Time in Heterogeneous Memory IPs via Stacked Ensemble Framework
- VIPER: Architecture-Aware Performance Modeling for Processing-in-Memory Design-Space Exploration
- CTTE: An Open Dual-Protocol RISC-V Trace Encoder for N-Trace and E-Trace