Addressing MIPI M-PHY connectivity challenges for more efficient testing
Chris Loberg, Tektronix
embedded.com (September 20, 2014)
As the industry moves to adopt the MIPI Alliance's M-PHY standard, designers are encountering some significant challenges related to oscilloscope measurements and, more specifically, probing. These challenges include strict requirements such as bus termination and input return loss, as well as the need to minimize common mode loading on the device under test (DUT) and signal fidelity requirements such as wide bandwidth, low noise, and high sensitivity.
The intent of this article is to provide information that will increase your chances of accurate and repeatable test results to ensure compliance with the standard. We will first review the requirements of the M-PHY standard relevant to oscilloscope probing, discuss the tests required in the M-PHY Physical Layer Conformance Test Suite (CTS), and provide practical examples of M-PHY probing with currently available oscilloscopes and probes.
To read the full article, click here
Related Semiconductor IP
- MIPI M-PHY
- MIPI M-PHY Verification IP
- Simulation VIP for MIPI M-PHY
- MIPI MPHY Verification IP
- MIPI MPHY Synthesizable Transactor
Related Articles
- Understand and perform testing for MIPI M-PHY compliance
- Integrating VESA DSC and MIPI DSI in a System-on-Chip (SoC): Addressing Design Challenges and Leveraging Arasan IP Portfolio
- Bigger Chips, More IPs, and Mounting Challenges in Addressing the Growing Complexity of SoC Design
- Making SPI-4.2 Implementations More Efficient: Part 2
Latest Articles
- CHIA: An open-source framework for principled, agentic AI-driven hardware/software co-design research
- Croc: Training the Next Generation Chip Designers on Domain-Specific End-to-End Open Source Silicon
- Design and Development of a Neuromorphic Silicon Suite: PVT Sensing, Stochastic LIF Inference, On-Chip STDP Learning, and Crossbar Programming
- LLM4RTL: Tool-Assisted LLM for RTL Generation
- Towards Delta Aware Training: Efficient DNN Weight Storage for Resource-Constrained FPGAs