Flip Chip: An established platform still in mutation!
Flip-Chip is a chip packaging technique in which the active area of the chip is ‘flipped over’ facing downward, instead of facing up and bonded to the package leads with wires from the outside edges of the chip.
Any surface area of the Flip-Chip can be used for interconnection, which is typically done through metal bumps. These bumps are soldered onto the package and underfilled with epoxy. The Flip-Chip allows for a large number of interconnects with shorter distances than wire, which greatly reduces inductance.
According to Lionel Cadix, market and technology analyst, Yole Developpement, France, metal bumps can be made of solder (tin, tin-lead or lead-free alloys), copper, gold and copper-tin or Au-tin alloys. The package substrates are epoxy-based (organic substrates), ceramic based, copper based (leadframe substrates), and silicon or glass based.
To read the full article, click here
Related Semiconductor IP
- Band-Gap Voltage Reference with dual 2µA Current Source - X-FAB XT018
- 250nA-88μA Current Reference - X-FAB XT018-0.18μm BCD-on-SOI CMOS
- UCIe D2D Adapter & PHY Integrated IP
- Low Dropout (LDO) Regulator
- 16-Bit xSPI PSRAM PHY
Related Blogs
- Rivos and Canonical partner to deliver scalable RISC-V solutions in Data Centers and enable an enterprise-grade Ubuntu experience across Rivos platforms
- Bringing MEMS and asynchronous logic into an SoC design flow
- Intel's First 14nm Chip NOT an x86 Processor
- Can FPGA Fabric and an SoC Co-Exist on the Same Chip?
Latest Blogs
- AI in Design Verification: Where It Works and Where It Doesn’t
- PCIe 7.0 fundamentals: Baseline ordering rules
- Ensuring reliability in Advanced IC design
- A Closer Look at proteanTecs Health and Performance Management Solutions Portfolio
- Enabling Memory Choice for Modern AI Systems: Tenstorrent and Rambus Deliver Flexible, Power-Efficient Solutions