LPDDR6 Verification IP

Truechip's LPDDR6 Verification IP provides an effective & efficient way to verify the LPDDR6 components of an IP or SoC. Truechip's LPDDR6 VIP is fully compliant with JESD209-6 LPDDR6 SDRAM standard. The VIP is lightweight, featuring easy-to-use plug-and-play components, so there is no impact on the design cycle time.

• Supports LPDDR6 memory densities range up to 64Gb
• Supports two sub-channels contains 12 DQ signals each
• Supports all burst lengths
• Supports capturing of all the valid LPDDR6 commands as per the specification
• Supports per-row activation counting PRAC
• Support for all speed grades
• Constantly monitors LPDDR6 behaviour during simulation
• Supports Programmable READ/WRITE Latency timings
• Supports programming of All-Mode Registers
• Support both Normal and Efficiency Mode Configurations
• Support CS, ZQ Calibration, Command Bus, WCK2CK Levelling, Read DQ Calibration, WCK-DQ, Enhance RDQS and RX Offset Calibration Trainings
• Support all CAS Synchronization operations
• LPDDR6 support 4 banks with 4 bank group per sub-channel
• Supports single-ended clocks, frequency change, and clock stop operations
• Supports refresh, postpone, and pull in of refresh, SRE, PASR, sleep modes, SR power down modes
• Supports Post Package Repair (PPR)
• Supports Link ECC/EDC, On-die ECC, Error Check and Scrub (ECS)
• Supports ZQ, MPC, DCM and DCA, and WCK2CK oscillator
• Supports DVFSC, DVFSQ, ODT, Non-target Dram ODT, thermal sensor, & temperature offset
• Supports RDQS, RDQS toggle mode, and enhanced RDQS mode
• Supports all WCK and RDQS preamble and post-amble patterns
• Supports DBI-DC, Meta Function modes
• Support CA Parity Check modes
• Support Loopback modes
• Reports various timing errors, which can be used to check any timing violations
• It provides full control to the user to enable/disable various types of messages
• Supports advanced System Verilog features like constrained random testing
• Supports dynamically configurable modes
• Strong Protocol Monitor with real-time, exhaustiv,e programmable checks
• Supports RAS Focused – Link Protection
• Supports ALERT output signal
• Supports Dynamic as well as Static Error Injection scenarios
• On the fly protocol checking using protocol check functions, static and dynamic assertion
• Built-in Coverage analysis
• Provides a comprehensive user callbacks in PHY, Controller, and Memory Model BFMs
• Graphical analyser to show transactions for easy debugging

• Available in native SystemVerilog (UVM/OVM/VMM) and Verilog.
• Unique development methodology to ensure highest levels of quality.
•  Availability of Compliance & Regression Test Suites
• 24X5 customer support
• Unique and customizable licensing models.
• Exhaustive set of assertions and cover points with connectivity example for all the components.
• Consistency of interface, installation, operation and documentation across all our VIPs.
• Provide complete solution and easy integration in IP and SoC environment

• LPDDR6 Functional memory controller BFM/Agent
• LPDDR6 SDRAM Model
• LPDDR6 Monitor and Scoreboard
• LPDDR6 PHY BFM Model
• LPDDR6 PHY Monitor and Scoreboard
• Test Environment & Test Suite:
  • Basic Directed Tests
  • Random Tests
  • Error Injection Tests
  • Assertions & Cover Point Tests
• Integration Guide, User Manual and Release Notes