CSI-2 v1.3 Transmitter IP

Arasan Chip Systems is a leading SOC IP provider of a complete suite of MIPI compliant IP solutions, which consist of IP cores, verification IP, software stacks and drivers, protocol analyzers, hardware platforms for software development and compliance testing, and optional customization services.

The MIPI compliant IP cores are interface building blocks that simplify interconnect architectures in mobile platforms. This leads to smaller footprint, greater interoperability between mobile IP, chips and devices from diverse sources, and lower power and EMI.

Arasan IP Core that functions as a MIPI CSI-2 Transmitter, which typically resides in a mobile platform’s camera module, and communicates over a D-PHY/C-PHY link to a CSI2 Receiver in the applications processor. The Arasan CSI-2 combo IP is MIPI-compliant and provides a standard, scalable, low-power, high-speed interface that supports a wide range of higher image resolutions.

Compliant with the following MIPI specifications:

•  CSI2 specification v1-3
•  DPHY specification v1-2
•  CPHY specification v1-0

CSI-2 Combo Transmitter Core features:

•  Use of either D-PHY/C-PHY by user configuration
•  Lane Configurability depending on the bandwidth requirements of the application, up to 8-lanes for DPHY and up to 3-lanes for C-PHY
•  Connectivity to DPHY/CPHY through MIPI PPI Interface
•  High Speed (HS) transmit rates of 182Mbps to 5714Mbps per lane with C-PHY interface
•  High Speed (HS) transmit rates of 40Mbps to 2500Mbps per lane with D-PHY interface
•  Support for Ultra Low Power Mode (ULPS)
•  Support for Continuous and Non-Continuous Clock Mode

 Pixel formats supported

•  RAW data type
• YUV data type
•  RGB data type
•  All user Defined data types / JPEG
•  Generic 8-bit long packet data types

Supports Data Type Interleaving

Supports Virtual Channel Interleaving

Pixel Level Input Interface for Image Sensor

Supports Header and Payload Checksum

Configurable for two mode of operation:

•  Store and Forward Mode – Stores the full pixel packet before forwarding.
• Cut through Mode – Initiates the HS transmission to D/CPHY as soon as the pixel information is received. Makes use of very shallow memory.

Supports Multi Pixel Mode – Multiple Pixels per clock to bring down the sensor clock frequency to support higher resolution applications

PPI Data Lane swapping as per user configuration
Optional support for Compressed data formats

Host interface for register configuration and monitoring:

•  Used for programming both CSI-2 and PHY related registers. Reserved address space [0x00 – 0x0F] for the PHY related registers.
•  Optional support for the AHB/APB Interface

• Fully compliant to MIPI standard
• Small footprint
• Code validated with Spyglass
• Functionality ensured with comprehensive verification
• Product quality proven with silicon
• Premier direct support from Arasan IP core designers

• Verilog HDL of the IP core
• User guide
• Synthesis scripts
• Lint report
• CDC report
• Verilog test suite
• Gate count estimation available upon request