USB3 Gen T Tunneling Over USB4
USB Promoter Group recently released USB4 Version 2.0 and this updated specification extends USB4 speed and data protocol performance, enabling manufacturers to develop products that can deliver up to 80 Gbps of data performance over the USB Type-C® cable and connector.
Protocol updates and optimizations are also being made to enable higher performance for USB 3.2 (USB3 Gen T Tunneling), DisplayPort™, and PCI Express® (PCIe®) data tunneling to best use the higher available bandwidth.
USB3 Gen T is a type of USB3 Tunneling architecture where the Enhanced SuperSpeed protocol is extended to allow operation at the maximum bandwidth available on the USB4 link. GenT supports transmit and receive data bandwidth of up to 80 Gbps with a symmetric link and up to 120/40 Gbps transmit/receive or 40/120 Gbps transmit/receive data bandwidth with an asymmetric link.
To read the full article, click here
Related Semiconductor IP
- USB4 VIP
- USB4 v2.0 Verification IP
- PCIe Controller for USB4 with AXI
- PCIe Controller for USB4
- USB4 Gen3 x2-lane PHY, TSMC N5, 1.2V, N/S orientation, type-C
Related Blogs
- DisplayPort (DP) Tunneling over USB4
- USB3, PCIe, DisplayPort Protocol Traffic Finding its Way Through USB4 Routers
- Are General-Purpose Microprocessors Over?
- Inside the SiFive Performance™ P570 Gen 3: High Performance Efficiency for Next-Generation Consumer and Commercial Applications
Latest Blogs
- M31 High-Speed and Long-Channel MIPI C/D-PHY Solution on TSMC N3P/N3C
- Understanding security certification and how analog IP can help
- Embedded Security explained: Secure boot for embedded systems
- World's First Standards-Compliant 112G PHY IP for Linear Optics: A Turning Point for AI Interconnects
- One Key for Every Door: How Aliro Extends the UWB Digital Key Beyond the Car