Host / device LIN controller IP

The LIN Controllers IP– Local Interconnect Network Controllers IPs are compliant to LIN 2.0, 2.1 & 2.2A Specifications. Backward compliant to LIN 1.3 Specification as well. These can be integrated into systems through various simple AMBA-APB, AMBA-AHB or SRAM like interfaces that require LIN connectivity commonly used in automotive and industrial applications.

The LIN Controller cores are easy to integrate with the rest of the system using either AMBA-APB, AMBA-AHB standard interfaces or other SRAM like simple interfaces. This highly configurable design supports programmable Interrupts, data and baud rates, acceptance filters & buffering schemes specific to the application.

LIN Specifications Support

•  Implements the LIN 2.0, 2.1 and 2.2A protocols
•  Backward Compatible to LIN 1.3
•  Fully Programmable to operate in Host or Device Mode
•  Simple interfaces to the system through AMBA-APB, AMBA-AHB or other SRAM like interfaces
•  Design size can optionally be further reduced using another APB to fetch configurations information from outside
• Fully programmable data rates up to 20Kbits/s in Host Mode
•  Automatic bit rate detection in register
•  Configurable small data buffer
•  Option for Clock synchronization
•  Fully synchronous design
•  Max. frequency supported up to 300MHz
• Optional Safety-enhanced ASIL & ISO26262 compliance design

Advanced Features

• Highly configurable design for data rate, baud-rate, interrupt sources and mix-bit options
• Very low software overhead, future-proof design

RAS Features

• Design supports enhanced checksum per channel
• Robust Interrupt structure for Error managements

• Automotive
•  Industrial

• System Verilog RTL Source Code
•  A simplified Testbench with simulation models to run initial set of tests after release
• Synthesizable Netlist
• Synthesis Scripts and exception lists
• Timing Report
•  Protocol Compliance & Coverage Report
•  Sample Firmware with Drivers
• Application Notes