TSMC 4nm (N4P) 1.2V/1.8V Basekit Libraries
Synopsys provides system-on-chip (SoC) designers with an extensive offering of high-quality, foundation IP, including memory comp…
TSMC 12nm FFC 6track Delay Cells
TSMC 12nm FFC 6 track High Density Delay Cells
MIPI C-PHY v2.0 /D-PHY v2.5 Combo IP in TSMC
MIPI D-PHY is a serial interface technology which is widely adopted in smartphones and other multimedia enabled mobile devices.
Ring oscillator and voltage to current converter, 3-6 GHz frequency tuning range
Integr N Clock PLL
Divide-by-N, up to 3GHz, Programmanble Division Number
10-bit divider, 3 GHz maximum input frequency
Output divider with glitchless transition between division values
Lock detector
Temperature sensor +85...+145degC, 3-bit digital output
Temperature sensor for monitoring on-chip temperatures +85...+145degC, 3-bit digital output
Thermal sensor, 0.6V+8mV*(T-0degC)
Thermal sensor, 0.6V+8mV*(T-0degC)
TON timer, provides COT switching time based on Vin and Vout
TON timer, provides COT switching time based on Vin and Vout
Analog signal MUX for telemetry purposes, 16:1
Analog signal MUX for telemetry purposes, 16:1 (implemented using 4:1 MUXes)
10-input testmux, with LU protection at output
10-input testmux, has LU protection at output, can be used at chip I/O
Analog signal MUX, 4:1, for on-chip analog signal monitoring
Analog signal MUX, 4:1, for on-chip analog signal monitoring
21-input testmux, with LU protection at output
21-input testmux, has LU protection at output, can be used at chip I/O
Levelshifter low-to-high, used in HS driver
Levelshifter low-to-high, used in HS driver
Levelshifter high-to-low, used in HS driver
Levelshifter high-to-low, used in HS driver
4.25V...15V to 3.3V/120mA LDO
DCDC regu power stage, includes bootstrap regulator
DCDC regu power stage, includes bootstrap regulator
LS current replica block, 1:100'000
LS current replica block, 1:100'000, for LS switch current measurement