Vendor: WWAGO Inc. Category: CAN / CAN-FD / CAN-XL

Configurable CAN Bus Controller

The core is a standalone controller for the Controller Area Network (CAN), widely used in automotive and industrial applications.

Contact Provider Request Datasheet

Overview

The core is a standalone controller for the Controller Area Network (CAN), widely used in automotive and industrial applications. It conforms to Bosch CAN 2.0B specification (2.0B Active).

The core has a simple CPU interface (8/16/32 bit configurable data width), with small or big endian addressing scheme. Hardware message filtering and 64 byte receive FIFO, enable back-to-back message reception, with minimum CPU load. The core is described at RTL level, allowing target use in FPGA or ASIC technologies.

Key features

  • Conforms to Bosch CAN 2.0B Active
    • 11 and 29 bit wide message identifiers
  • 8/16/32-bit CPU slave interface with small or big endianness
  • Simple interface allows easy connection to CPU
  • Supports both standard (11-bit identifier) and extended (29 bit identifier) frames
  • Data rate up to 1 Mbps
  • Hardware message filtering (dual/single filter)
  • 64 byte receive FIFO
  • 16-byte transmit buffer
  • No overload frames are generated
  • Normal & Listen Only Mode
  • Single Shot transmission
  • Ability to abort transmission
  • Readable error counters
  • Last Error Code
  • Fully synthesizable
  • Static synchronous design with positive edge clocking and synchronous reset
  • No internal tri-states
  • Scan test ready

Specifications

Identity

Part Number
CAN Controller
Vendor
WWAGO Inc.
Type
Silicon IP

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Provider

WWAGO Inc.
HQ: China
Contact WWAGO Inc.

Learn more about CAN / CAN-FD / CAN-XL IP core

CANsec: Security for the Third Generation of the CAN Bus

CANsec is a resource-efficient solution for securing the CAN bus against the most common cyber security threats on software-defined vehicles. Here we show that the encryption and authentication of CAN XL frames are possible without latencies or loss...

Frequently asked questions about CAN / CAN FD / CAN XL IP cores

What is Configurable CAN Bus Controller?

Configurable CAN Bus Controller is a CAN / CAN-FD / CAN-XL IP core from WWAGO Inc. listed on Semi IP Hub.

How should engineers evaluate this CAN / CAN-FD / CAN-XL?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this CAN / CAN-FD / CAN-XL IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP