Vendor: Vervesemi Microelectronics PVT LTD Category: Temperature Sensor

14 bit digital output CMOS voltage, temperature sensor in 110nm

TSENS1KPS110 is an IP for voltage, temperature sensing of the silicon chip die.

Contact Provider Request Datasheet

Overview

TSENS1KPS110 is an IP for voltage, temperature sensing of the silicon chip die. Each voltage sensor node is connected with the central controller with a single wire digital signal for communicating the sensor data in real time. Dedicated enable signal is provided with each node to enable or disable the operation for power management. IP has parallel communication interface with command and response protocol using two 12bit digital I/O ports. Alert signals can also be configured to alert low and high threshold crossing using parallel communication port.
Sensor has trimming options to calibrate the accuracy of temperature probes.
Design is based on ultra-low power delta sigma modulator with excellent noise performance and high accuracy eliminating all inherent offset and gain errors while implementing the compensation inbuilt in the loop.

Key features

  • 14b Digital voltage and Temperature Resolution
  • 1Ksps Maximum data rate
  • <100uA Current Consumption
  • Ultra-low leakage power
  • Ultra-low active power
  • Excellent temperature accuracy
    • +/- 1.5C after single room temperature trim
  • Compact Area
  • -40C to +125C Temperature Range
  • 110nm

Benefits

  • < One degree accurate
  • Thermal sensor

Applications

  • Die Temperature monitoring
  • Under and over temperature monitoring
  • System performance enhancement

What’s Included?

  • Datasheet
  • Hard Macro (GDSII)
  • Characterization Report (as applicable)
  • Abstract View (LEF)
  • Integration and Customer

Specifications

Identity

Part Number
TSENS1KPS110
Vendor
Vervesemi Microelectronics PVT LTD
Type
Silicon IP

Provider

Contact Vervesemi Microelectronics PVT LTD

Learn more about Temperature Sensor IP core

Power Management for Internet of Things (IoT) System on a Chip (SoC) Development

There are many factors that must be considered when developing a custom System on a Chip (SoC) for Internet of Things (IoT) applications. Chief among these are the power management circuits on the die. Vidatronic offers this white paper to discuss these considerations and all of the various circuit blocks that can be found in this application. Vidatronic IP solutions are discussed and the benefits they bring to IoT SoC designers.

Smart Transit Solution

Surveillance and security has become increasingly important during modern days for government/law enforcement, public or private transit authorities and for the fleet management. To monitor or investigate accidental damage, theft, harassment or left packages, producing/collecting evidences and analyze the occurrence of situation is challenge. This white paper describes how smart transit solution can generate evidences and help in analyze the situation of an incident. Smart transit solution improves profitability by enabling batter safety, security and service.

Design and Development of a Neuromorphic Silicon Suite: PVT Sensing, Stochastic LIF Inference, On-Chip STDP Learning, and Crossbar Programming

The authors present four interface-compatible digital IP blocks implemented as standard-cell CMOS on the SkyWater 130 nm process: a process, voltage and temperature (PVT) sensor built from five selectable ring oscillators that also provides a jitter-based true-random-number generator and a frequency-bounds health monitor; a stochastic leaky integrate-and-fire (LIF) neuron with a configurable LFSR, a programmable activation table, and a refractory period; an on-chip spike-timing-dependent plasticity (STDP) controller with a programmable curve and reward-modulated, eligibility-trace, and anti-Hebbian modes; and a memristive-crossbar controller supporting forming, set, reset, read, and automated current-voltage sweep with current-compliance limiting and half-select biasing.

Context Based Clock Gating Technique For Low Power Designs of IoT Applications - A DesignWare IP Case Study

This paper discusses about the intelligent low power techniques such as context based clock gating and how they are useful for IoT applications. It also describes how it improves the overall power efficiency of the system. The power statistics shared shows how the overall idle power and functional power consumption is significantly reduced. Further we discuss about how it can be combined with few other low power techniques to reduce the overall power

Frequently asked questions about Temperature Sensor IP cores

What is 14 bit digital output CMOS voltage, temperature sensor in 110nm?

14 bit digital output CMOS voltage, temperature sensor in 110nm is a Temperature Sensor IP core from Vervesemi Microelectronics PVT LTD listed on Semi IP Hub.

How should engineers evaluate this Temperature Sensor?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Temperature Sensor IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP