Synopsys I3C I/O library supports a simplified system of connecting and managing multiple sensors in a device.
- GlobalFoundries
- 22nm
- FDX
- Available on request
Synopsys I3C I/O library supports a simplified system of connecting and managing multiple sensors in a device.
802.11ah RF IP is a radio system for signal transmission and reception over wireless channels on the 863-928 MHz ISM frequency ba…
LogicFlash® Embedded MTP in GlobalFoundries 180nm~110nm
LogicFlash® MTP是一种基于CMOS工艺的嵌入式非挥发性存储器技术,基于逻辑工艺实现,无需增加额外光罩层次,或通过增加1层额外光罩,缩减IP面积,适合于1KB~64KB的中等容量应用,同时提供高达2万次的擦写次数。
Always-on Voice Activity Detection interfacing with analog microphones
The WT-a-HD.03 is a mixed analog/digital Virtual Component (ViC) containing a Voice Activity Detection (VAD) engine for ultra low…
The WT-a-HD-MC.03 is a mixed analog/digital Virtual Component (ViC) containing a Voice Activity Detection (VAD) engine for ultra …
Nano power DC-DC converter in GF 22FDX with ultra-low quiescent current and high efficiency at light load
The RAR-eSR-qLR Retention Alternating Regulator combines two regulation sub-components: a high-efficiency switching regulator (eS…
High efficiency and Low BoM DC-DC designed in GobalFoundries 22FDX
High efficiency DC-DC converter designed in GF 22FDX with full PWM operation mode.
VCO auto-calibration for Varactor 6bit
VCO auto-calibration for Varactor 6 bit
BandGap Reference 1.5 V BGR
Low-Noise Amplifier 10-15GHz
The RF libraries include analog signal pads and ESD protection components for RF applications.
The ONFI library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage referen…
2.5V 5V Tolerant GPIO Inline IO Pad Set
The 3.3V General Purpose I/O (5VT) library provides programmable bidirectional I/O’s that are both 5V tolerant and fault tolerant.
2.5V 5V Tolerant GPIO Staggered IO Pad Set
The 3.3V General Purpose I/O (5VT) library provides programmable bidirectional I/O’s that are both 5V tolerant and fault tolerant.
The LVDS I/O is a three-module design (input, output and reference block).
The LVDS I/O is a three-module design (input, output and reference block).
The SSTL_15/18 pad set is a full complement of I/O, calibration, power, and spacer cells that are necessary to assemble a padring…
3.3V General Purpose I/O Inline Pad Set
The 3.3V GPIO library provides general purpose bidirectional I/O cells.
3.3V General Purpose I/O Staggered Pad Set
The 3.3V GPIO library provides general purpose bidirectional I/O cells.