2.5V 5V Tolerant GPIO Inline IO Pad Set

The 3.3V General Purpose I/O (5VT) library provides programmable bidirectional I/O’s that are both 5V tolerant and fault tolerant.
The I/O’s are provided in a standard width variant and in a wider variant that includes an ESD event triggered SCR for those clients that require 200V Machine Model ESD protection.

• Fault tolerant operation – no current flow @ DVDD = 0V
• 5V tolerant @ 3.3V operation
• Multi-Voltage (1.8V, 2.5V, 3.3V)
• Programmable drive strength (rated 2mA to 12mA)
• Selectable output slew rate
• Optimized for EMC with SSO factor of 8
• Open-drain output mode
• Programmable input options (pull-up/pull-down/repeater)
• Power-On Start (POS) capable
• Power sequencing independent design with Power-On Control
• In full-drive mode, this driver can operate to frequencies in excess of 100MHz with 15pF external load and 125 MHz with 10pF load. Actual frequency limits are load and system dependent. A maximum

• Physical abstract in LEF format (.lef)
• Timing models in Synopsys Liberty formats (.lib and .db)
• Calibre compatible LVS netlist in CDL format (.cdl)
• GDSII stream (.gds)
• Behavioral Verilog (.v)
• Layout Parasitic Extraction (LPE) SPICE netlist (.spice)
• Databook (.pdf)
• Library User Guide - ESD Guidelines (.pdf)