High bandwidth memory (HBM) PHY IP verification
Ankit Sheth & Jignesh Oza (eInfochips)
EDN (February 23, 2016)
Memory systems have evolved a lot in the previous few years due to advancements in fabrication technology. High Bandwidth Memory (HBM) is an example of the latest kind of memory chips which can support low power consumption, ultra-wide communication lanes, and stacked configurations. HBM subsystems involve different types of memory controllers (full-speed, half-speed), HBM PHY, and HBM DRAM. The HBM subsystem is suitable for applications involving high performance graphics and computing, high end networking and communication devices, and memory-hungry processors. Because of their critical end-application role, it is crucial to verify all design components involved in HBM subsystems. Here, we will discuss the role of the HBM PHY, along with the major verification aspects/challenges.
Introduction
The HBM PHY is a key element in an overall HBM system solution. HBM PHY generally receives HBM DRAM row-col commands, data, parity, etc. from memory controllers through DFI interfaces and passes them to HBM memory along with the use of HBM DRAM interface. It deals with two different interfaces and supports multiple frequency ratios for DFI interfaces. HBM PHY is ideally required to support all HBM memory features like frequency ratios, data rates, memory sizes, pseudo channel modes, legacy modes, DBI,DM etc. HBM PHY can be verified at the sub-system level and block level with different, vendor-specific memory controllers and HBM memories.
To read the full article, click here
Related Semiconductor IP
- MACsec Engine optimized for 10Base-T1S/T1L applications
- Dual Port, Voltage Scaling Register File Compiler on GF22FDX+
- Single Port, Voltage Scaling, High Speed SRAM Memory Compiler on GF22FDX+
- I3C Full Controller / Target
- I3C HCI Host Controller
Related Articles
- High Bandwidth Memory (HBM) Model & Verification IP Implementation - Beginner's guide
- TeraPool: A Physical Design Aware, 1024 RISC-V Cores Shared-L1-Memory Scaled-up Cluster Design with High Bandwidth Main Memory Link
- Automated Pre-Silicon Verification of High-Speed DDR5 and LPDDR5/6 Memory Controllers: Closed-Loop Timing, Mode Register, and PHY Synchronization in UVM
- Understanding the Power Consumption of Modern High Bandwidth Memory: Experimental Analysis and Modeling Using Real HBM2 DRAM Chips
Latest Articles
- An Agentic Python Framework for LLM-Driven UVM Testbench Synthesis with Closed-Loop Compiler Feedback
- Reconfiguring System-Level Protection Through Bounded Delegation in RISC-V MCUs
- SkipLane: Write-Once, Conflict-Free Accumulation for Zero-Skipping CNN Engines on FPGAs
- Priority-Aware Deficit Round Robin for AXI4 Bandwidth Fairness in ASAP-7nm Process
- Atik: A Shared-Mesh Transformer Accelerator for RISC-V