CFET Beyond 3 nm: SRAM Reliability under Design-Time and Run-Time Variability
Abstract
This work investigates the reliability of complementary field-effect transistors (CFETs) by addressing both design-time variability arising from process variations and run-time variability due to temperature and aging effects. A rigorously calibrated TCAD model, validated against experimental CFET data, is employed to quantify the impact of metal gate granularity (MGG)-induced work function variation (WFV) and random dopant fluctuation (RDF) on key device parameters, including the threshold voltage (VTH), on-state current (ION), and off-state current (IOFF). Temperature-dependent variability is systematically analyzed to further elucidate the behavior of these advanced devices. To capture the dynamic effects of aging, the reaction-diffusion (RD) framework—which accounts for defect generation due to Negative Bias Temperature Instability (NBTI)—is implemented in TCAD, enabling detailed modeling of trap generation and the corresponding VTH shifts in p-type transistors under varying gate stress biases (VGSTR) and operating temperatures. At the circuit level, a full array of 6T-SRAM cells with the requisite peripheral circuits is simulated using SPICE after careful calibration of the the industry-standard compact model of gate-all-around (BSIM-CMG) against the TCAD data. Variability analysis reveals that the access disturb margin achieves a cell sigma (μ/σ) of 17.4 at nominal supply voltage, significantly exceeding the 6σ robustness criterion for read disturbances. Moreover, as the operating temperature increases from 300K to 398K, the read static noise margin (RSNM) and hold static noise margin (HSNM) degrade by 13.7% and 6.37%, respectively, while the write static noise margin (WSNM) improves by 18.3 %. These findings provide critical insights into the design trade-offs and reliability challenges of CFET-based SRAMs.
To read the full article, click here
Related Semiconductor IP
- MACsec Engine optimized for 10Base-T1S/T1L applications
- Dual Port, Voltage Scaling Register File Compiler on GF22FDX+
- Single Port, Voltage Scaling, High Speed SRAM Memory Compiler on GF22FDX+
- I3C Full Controller / Target
- I3C HCI Host Controller
Related Articles
- Fully depleted silicon technology to underlie energy-efficient designs at 28 nm and beyond
- A 16 nm 1.60TOPS/W High Utilization DNN Accelerator with 3D Spatial Data Reuse and Efficient Shared Memory Access
- Software-to-silicon verification @ 45 nm and beyond
- Mixed-Signal IP Design Challenges in 28 nm and Beyond
Latest Articles
- PVTSizing 2.0: A Fast and Reliable Analog Circuit Sizing Operator for Agentic EDA Workflows
- An Agentic Python Framework for LLM-Driven UVM Testbench Synthesis with Closed-Loop Compiler Feedback
- Reconfiguring System-Level Protection Through Bounded Delegation in RISC-V MCUs
- SkipLane: Write-Once, Conflict-Free Accumulation for Zero-Skipping CNN Engines on FPGAs
- Priority-Aware Deficit Round Robin for AXI4 Bandwidth Fairness in ASAP-7nm Process