Attopsemi Published a Paper in ICMTS 2016, Yokohama, Japan
Hsinchu, Taiwan – May 2, 2016 – Attopsemi published a paper “Ultra-small and Ultra-reliable Innovative Fuse Scalable from 0.35um to 28nm” in 2016 International Conference on Microelectronic Test Structures (ICMTS). ICMTS was held in March 28 to 31, 2016 in Yokohama Japan and is the only conference dedicated to semiconductor test structures.
In the well-received paper, Attopsemi showed her I-fuse™, a fuse-based OTP, is programmed below a critical current. Based on collected data from 0.35um to 28nm fabricated with different materials such as WSi2, TiSi2, CoSi2, NiSi, and metal gates, the critical current is proven as the on-set of thermal run away. If a fuse is programmed below the critical current, the programming behavior is deterministic, controllable, and can be modeled precisely by physical laws as heat generation and dissipation. On the other hand, if a fuse is programmed above the critical current, as the conventional eFuse does, the programming behavior is like an explosion. The debris created after explosion can micro-bridge again and becomes shorts to cause long term reliability issues. Programmed below the critical current, I-fuse™ can easily pass the conventional 150oC HTS and 125oC HTOL for 1,000 hours, Moreover, I-fuse™ showed the OTP can pass 300oC for 4,290 hours with less than 10% of cell current changes.
Please refer to the following links for more information.
http://www.if.t.u-tokyo.ac.jp:8080/program#Memories
About Attopsemi Technology
Founded in 2010, Attopsemi Technology is dedicated to developing and licensing fuse-based One-Time Programmable (OTP) IP to all CMOS process technologies from 0.7um to 7nm and beyond with various silicided polysilicon and HKMG technologies. Attopsemi provides the best possible OTP solutions for all merits in small size, high quality, high reliability, low power, high speed, wide temperature and high data security. Attopsemi's proprietary I-fuse™ OTP technologies have been proven in numerous CMOS technologies and in several silicon foundries.
Related Semiconductor IP
- Band-Gap Voltage Reference with dual 2µA Current Source - X-FAB XT018
- 250nA-88μA Current Reference - X-FAB XT018-0.18μm BCD-on-SOI CMOS
- UCIe D2D Adapter & PHY Integrated IP
- Low Dropout (LDO) Regulator
- 16-Bit xSPI PSRAM PHY
Related News
- Elliptic Technologies To Showcase Security Solutions At The Embedded Technology 2011 Conference In Yokohama, Japan
- Innotech represents Cosmic Circuits in TSMC Symposium in Yokohama, Japan on 29th June 2012
- Attopsemi Technology Attended 4th Japan SOI Symposium and Presented a Talk "I-fuse: A Disruptive OTP Technology"
- GUC Expands Presence in Japan with New Office Opening in Yokohama
Latest News
- SEMI Reports Worldwide Silicon Wafer Shipments Increase 13% Year-on-Year in Q1 2026
- POLYN Technology Announces Tapeout of Automotive Chip
- QuickLogic Establishes New Banking Relationship and Secures $10 Million Revolving Credit Facility
- TES is extending its PMU IP portfolio for X-FAB’s XT018 - 0.18µm BCD-on-SOI technology.
- RF Front-End Modules & Components IP Trends – Q1 2026 Monitoring Release