Overview
Xilinx provides a generic forward error correction (FEC) engine to generate and insert a SMPTE ST2022 compliant video over IP FEC stream along with the media stream and supporting up to 512 video channels, accelerating time to market and driving the convergence of broadcast and IP networks.
The Video over IP FEC LogiCORE IP enables forward error correction data to be added to IP-based video streams to provide robust broadcast contribution and distribution links. On the transmit side, media payloads from multiple packetized and multiplexed streams enter the Video over IP FEC transmitter. SMPTE ST 2022-1 or ST 2022-5 compliant two-dimensional FEC packets are generated and inserted along with the Media Packet streams. The transmitter also adds the relevant packet header information when needed, for instance in ST 2022 transport protocol, the ST 2022-2 or ST 2022-6 header is added on top of the media payload. Otherwise, the payload can also be sent as-is in a pass-through mode. Media and FEC packets from the Video over IP FEC transmitter need to go through a header insertion module to build complete Ethernet packets before sending out to the MAC. On the receive side, Ethernet packets from the MAC need to go through a de-framer module to remove the lower layer protocol headers before the data stream enters the Video over IP FEC receiver and any lost packets are recovered through the FEC matrix.
Based on standard AXI4-Stream, AXI4-Lite and AXI4-MM interfaces, the FEC engine can easily be integrated into your video over IP system design.
Learn more about Channel Coding IP core
This paper covers some practical aspects of designing the LDPC decoder starting from comparison between different techniques, different decoders parameters or standards, the effect of those parameters on the LDPC performance, also it discusses the algorithm selection process, and floating point implementation process.
We describe our SoC implementation of a baseband subsystem for a high performance 4G terminal. Our architecture, called FAUST, is based on distributed synchronization and asynchronous communication. We highlight how we have actually implemented these two
Satellite modems structure Internet access
DisplayPort uses Secondary Data Packets (SDPs), which are transported over the Main-Link that are not main video stream data. This allows it to carry audio and video simultaneously. The VIP supports audio transmission both in the original mode as defined in the specification as well as just as any other SDP being transmitted.
In this paper, a typical research case will be described on how to extend an existing SoC architecture of baseband processor on 3G terminal to the player on network multimedia compressed with MPEG-4, especially on how to build an effectively multi-layer a
