Types of Storages for Computing System-On-Chips
We are living in an age where we generate the same amount of data each year that has been generated since antiquity. Ever wondered how and where these peta /exa/zetta bytes of data are stored?
Vendor:
Dolphin Technology
Category:
SD / eMMC Controller
SD UHS2 PHY & Controller
DTI SD host controller facilitates host equipment to communicate with SD card.
Overview
DTI SD host controller facilitates host equipment to communicate with SD card. It supports both legacy and ultra-high speed II (UHS-II) interfaces.
Key features
Compliant with the following specifications:
- Part 1 Physical Layer Specification Version 5.0
- Part 1 UHS-II Addendum Version 1.02
- Part A2 SD Host Controller Specification Version 4.20
- AMBA, Advanced Peripheral Bus (APB) Specification Version 2.0
- AMBA, Advanced High-performance Bus (AHB) Specification Version 2.0
- AMBA, Advanced eXtensibale Bus (AXI) Specification Version 4.0
- AMBA, Advanced eXtensibale Lite Bus (AXI-Lite) Specification Version 4.0
DTI SD Host Controller supports:
- Standard Capacity (SDSC), High Capacity (SDHC) and Extended Capacity (SDXC) cards
- 1 and 4-bit parallel legacy SD interface, and serial UHS-II interface
- All bus interface modes: legacy SD (DS, HS, SDR12, SDR25, SDR50, SDR104, DDR50) and UHS-II (FD156, HD312)
- UHS-I Clock Tuning Mechanism
- Data transfer rate up to 104 Mbps with 4 parallel SD data lines
- Data transfer rate up to 312 Mbps in Half-duplex; 156 Mbps in Full-duplex mode with UHS-II interface
- UHS-II full duplex and half duplex modes
- UHS-II multiple power saving modes at Link level (Dormant) and Lane level (EIDL)
- UHS-II data burst retry
- Selectable non DMA, Single DMA (SDMA), Advanced DMA 2 (ADMA2) and Advanced DMA 3 (ADMA3)
- Dual data buffer to improve the data throughput
- Interfaces to DTI SD PHY
- Point to point topology for single device
- Card Detection (Insertion / Removal)
- Programmable system wake-up and interrupts
- SD6.0 Command Queue
Specifications
Identity
Part Number
SD UHS2 PHY & Controller
Vendor
Dolphin Technology
Type
Silicon IP
Files
Note: some files may require an NDA depending on provider policy.
Provider
HQ:
USA
Learn more about SD / eMMC Controller IP core
Virtual Prototyping Platform with Flash Memory
In this paper we will see how the flash memories developed using Carbon Model Studio helps to bring up an ARM® Cortex A7 flash memory sub-system with primary and secondary boot codes. Flash memories system demonstrated here can be used for early boot code and driver development for any CPU based SoC.
Allowing server-class storage in embedded applications
In this article, a new way to implement high performance data storage is presented, allowing the use of server-class storage technology in an embedded environment.
UFS Goes Mainstream
UniversalFlash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniPro as well as eMMC form factors to simplify adoption and development.
Universal Flash Storage: Mobilize Your Data
Universal Flash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniProSM as well as eMMC form factors to simplify adoption and development.
Frequently asked questions about SD / eMMC Controller IP cores
What is SD UHS2 PHY & Controller?
SD UHS2 PHY & Controller is a SD / eMMC Controller IP core from Dolphin Technology listed on Semi IP Hub.
How should engineers evaluate this SD / eMMC Controller?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this SD / eMMC Controller IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.