Vendor: IntelliProp Inc. Category: SATA Controller

SATA "Y" RAID Bridge without NCQ

The IntelliProp IPP-SA112A-BR SATA “Y” Bridge with RAID design provides SATA compliant connections and a standard SATA interface …

Overview

The IntelliProp IPP-SA112A-BR SATA “Y” Bridge with RAID design provides SATA compliant connections and a standard SATA interface that performs RAID0 to provide higher performance media access for high speed data paths. The SATA “Y” Bridge can improve performance and increase the amount of storage by aggregating several drives to one for a customer high speed data system. The SATA host port and the direct access port are selectable via a port select pin. The direct access port, host and device connections are speed independent allowing for speed bridging to the SATA connections.

Key features

  • Fully compliant to SATA Gen-1, Gen-2, and Gen-3 industry specifications
  • Independent speed negotiation on each SATA connection
  • Direct access port for high speed read/write access
  • Intended for integration with customer specific data acquisition logic
  • Hardware-only RAID; no processor or firmware required
  • Supports RAID Level-0
  • Achieve scalable performance with number of drives
  • Industry proven and qualified SATA interfaces
  • Available for application within multiple FPGA suppliers and product families

Applications

  • Increased storage capacity
  • Increased performance
  • 2n drive support
  • Switch access between user logic and host system

Specifications

Identity

Part Number
IPP-SA112A-BR
Vendor
IntelliProp Inc.
Type
Silicon IP

Files

Note: some files may require an NDA depending on provider policy.

Provider

Learn more about SATA Controller IP core

An Effective way to drastically reduce bug fixing time in SoC Verification

Many times we are not aware of very useful EDA tool options which are already available. Even if such options are very well documented, we don't look at them and try them. But some options are very useful and if you know them, it makes job of design engineer and/or verification engineer very easy. Here, I am going to talk about one very powerful and useful VSIM option of QuestaSim. It is VCDSTIM option of VSIM.

Designing Around an Encrypted Netlist: Is The Pain Worth the Gain?

Oftentimes, in order to save on the cost of IP, a company will select an encrypted netlist as the deliverable instead of the RTL source code. This is especially common among companies looking to develop in FPGA devices where they can often get the necessary IP from their FPGA vendor.

STBus complex interconnect design and verification for a HDTV SoC

To support High Definition Television (HDTV) application, the System on Chip (SoC) presented in this paper has to support multiple and concurrent internal processes. Most of these operations read data from memory, process them and store the resulting data into memory. Each functional unit of the system is responsible for a specific data processing, but all the data are stored in the same shared external memories.

Frequently asked questions about SATA Controller IP

What is SATA "Y" RAID Bridge without NCQ?

SATA "Y" RAID Bridge without NCQ is a SATA Controller IP core from IntelliProp Inc. listed on Semi IP Hub.

How should engineers evaluate this SATA Controller?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this SATA Controller IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP