IP Accelerated (Bye Bye EDA 360)
Eric Esteve
Vendor:
T2M GmbH
Category:
MIPI PHY
MIPI D-PHY Rx IP, Silicon Proven in TSMC 28HPC+
The MIPI D-PHY Rx IP Core in 28HPC+ aligns precisely with the D-PHY specification version 1.2, facilitating support for the Displ…
Overview
The MIPI D-PHY Rx IP Core in 28HPC+ aligns precisely with the D-PHY specification version 1.2, facilitating support for the Display Serial Interface (DSI) and MIPI Camera Serial Interface (CSI-2) protocols. This Rx PHY architecture includes one clock lane and four data lanes. Functionally, it integrates a digital backend for precise I/O operation management and an analog frontend for efficient generation and reception of electrical level signals. Moreover, it incorporates an internally calibrated termination resistor, ensuring optimized performance. These combined features establish it as a reliable solution for seamless data transmission and reception, meeting industry standards with excellence.
Key features
- Compliant to MIPI Alliance Standard for
- D-PHY specification Version 1.2
- Supports standard PPI interface compliant to MIPI Specification
- Supports synchronous transfer at high speed mode with a bit rate of 80-2500 Mb/s
- Supports asynchronous transfer at low power mode with a bit rate of 10 Mb/s
- Supports ultra-low power mode, high speed mode and escape mode
- Supports one clock lane and up to four data lanes
- Data lanes support transfer of data in high speed mode
- Supports error detection mechanism for sequence errors and contentions
- Supports contention detection
- Configurable skew option for each Clock and Data lanes
- Testability for TX, RX and PLL
- Silicon Proven in TSMC 28HPC+
Block Diagram
MIPI D-PHY Rx IP in 28HPC+ block diagram
What’s Included?
- GDSII & layer map
- Place-Route views (.LEF)
- Liberty library (.lib)
- Verilog behaviour model
- Netlist & SDF timing
- Layout guidelines, application notes
- LVS/DRC verification reports
Silicon Options
| Foundry | Node | Process | Maturity |
|---|---|---|---|
| TSMC | 28nm | HPC+ | In Production |
Specifications
Identity
Part Number
MIPI D-PHY Rx IP in 28HPC+
Vendor
T2M GmbH
Type
Silicon IP
Standards & Interfaces
MIPI PHY
MIPI D-PHY
Files
Note: some files may require an NDA depending on provider policy.
Provider
HQ:
Germany
Learn more about MIPI PHY IP core
MIPI DPHY Solution
Infineon Drives Automotive MCU Performance Higher with Synopsys Interface IP
Ron DiGuiseppe, Synopsys
Cadence First to Demo Complete M-PCIe PHY and Controller Solution at MIPI and PCI-SIG Conferences
Arif Khan
Super Edge Medical SoC (SEMC)
Post Covid 19, the biggest bet for revival of the industry is on 5G proliferation across the world. It is widely expected that 5G’s Enhanced Mobile broadband (eMMB) with speeds as high as 20X of 4G speed, Ultra reliable and Low Latency Communication ( URLLC) and massive Machine type connectivity (mMTC) will transform the world.
D-PHY, M-PHY & C-PHY? First Look at Testing MIPI's Latest PHY
Chris Loberg, Senior Technical Marketing Manager, Tektronix
Frequently asked questions about MIPI PHY IP
What is MIPI D-PHY Rx IP, Silicon Proven in TSMC 28HPC+?
MIPI D-PHY Rx IP, Silicon Proven in TSMC 28HPC+ is a MIPI PHY IP core from T2M GmbH listed on Semi IP Hub. It is listed with support for tsmc In Production.
How should engineers evaluate this MIPI PHY?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this MIPI PHY IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.