Vendor: Low Power Futures Category: IEEE 802.15.4

IP Platform for AI-Enabled IEEE 802.15.4 Smart Sensors

The LP1-120 IP Platform is built around the IEEE 802.15.4 connectivity standard.

Contact Provider Request Datasheet

Overview

The LP1-120 IP Platform is built around the IEEE 802.15.4 connectivity standard. This platform consists of the IEEE 802.15.4 MAC and PHY, a sensor fusion IP, and the LP-NNP IP. The LP1-120 IP Platform is designed to bring secure wireless connectivity to various ultra-low-power or battery-free smart devices, including industrial IoT, smart cities, smart grids.
The LP1-120 IP Platform is fully integrated for better portability to different embedded processors, including ARM, RISCV and ANDES. It can be smoothly integrated into an SoC or used as the main foundation of a standalone SoC.

Key features

  • IEEE 802.15.4 CONTROLLER :
    • BPSK (20 Kbps @ 868 MHz, 40 Kbps @ 915 MHz
    • OQPSK (250 Kbps @2450 MHz/2380 MHz, 250 Kbps @ 915 MHz, 100 Kbps @ 868 MHz)
    • GFSK (100 Kbps @968 MHz)
    • Other optional modulation support
    • Bitstream processing (Channel coding, CRC, AES-CCM)
    • MAC Firmware
  • NEURAL NETWORK PROCESSOR :
    • Configurable number of layers
    • Configurable number of activation unit per layer
    • Configurable input and output width
    • Comprehensive firmware
  • SENSOR FUSION :
    • Kalman Filter Accelerator
    • Convolutional Neural Network
  • SECURITY ACCELERATOR :
    • Protocol Supported : ECDHE, ECDSA
    • Acceleration units : ECC, SHA256, AES 128
    • TRNG
  • AMBA standard interface : AXI/AHB/APB

Benefits

  • Power and area-optimized
  • Fully integrated for better portability to different embedded processors, including ARM and RISCV
  • Built for smooth integration into an SoC or used as the main foundation of a standalone SoC
  • Support for highly-differentiating products at a lower cost and time-to-market
  • Complete UVM Verification environment
  • End-to-end FPGA Validation Platform validated with qualified certification tools

Applications

  • Industrial IoT
  • Smart Grid
  • Smart City
  • Smart Home

What’s Included?

  • Delivered as Soft or Hard IP
  • Link Layer Firmware and HCI
  • FPGA Validation Platform
  • UVM Test Bench
  • Technical Specifications
  • Integration Manual

Specifications

Identity

Part Number
LP1-120
Vendor
Low Power Futures
Type
Silicon IP

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Provider

Low Power Futures
HQ: Canada
Contact Low Power Futures

Learn more about IEEE 802.15.4 IP core

Utilizing UWB in ultra-low power ZigBee wireless sensor nodes

In this article, we discuss some of the key challenges associated to the design of UWB transmitters. We further present the first reported transmitter complying with the new 802.15.4a standard, which has been implemented in standard 90 nm CMOS technology and shows a record low-power consumption of 1 mW for a net data rate of 0.85 Mbps.

ZigBee SoCs provide cost-effective solutions

In a near future, our homes and workplaces will have wireless networks that control and monitor daily tasks autonomously or on command enhancing our comfort and safety. Several of these networks will be based on the ZigBee wireless technology and the unde

Frequently asked questions about IEEE 802.15.4 IP cores

What is IP Platform for AI-Enabled IEEE 802.15.4 Smart Sensors?

IP Platform for AI-Enabled IEEE 802.15.4 Smart Sensors is a IEEE 802.15.4 IP core from Low Power Futures listed on Semi IP Hub.

How should engineers evaluate this IEEE 802.15.4?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this IEEE 802.15.4 IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP