GDDR5X Controller IIP

GDDR5X interface provides full support for the GDDR5X interface, compatible with standard JESD232 and JESD232A specification and DFI-version 4.0 or 5.0 Specification Compliant. Through its GDDR5X compatibility, it provides a simple interface to a wide range of low-cost devices. GDDR5X IIP is proven in FPGA environment. The host interface of the GDDR5X can be simple interface or can be AMBA AHB, AMBA AHB-Lite, AMBA APB, AMBA AXI, AMBA AXI-Lite, Tilelink, OCP, VCI, Avalon, PLB, Wishbone or Custom protocol.

GDDR5X Controller IIP is supported natively in Verilog and VHDL

• Supports GDDR5X protocol standard JESD232 and JESD232A.
• Compliant with DFI-version 4.0 or 5.0 Specification.
• Supports all the GDDR5X commands as per the specs.
• Supports up to 16 AXI ports with data width upto 512 bits.
• Supports controllable outstanding transactions for AXI write and read channels
• Supports in port arbitration and multi port arbitration.
• Supports user programmable page policy.
• Closed page policy
• Open page policy
• Supports Error Checking and correction (ECC).
• Supports retry on ECC error, with retry limit user controllable.
• Supports high clock speeds in ASIC and FPGA.
• Supports low latency for write and read path.
• Supports reordering of transactions for higher performance.
• Supports programmable clock frequency of operation.
• Supports for all types of timing and protocol violation detection.
• Supports for following Package Pin out and Addressing,
• 4GB
• 6GB
• 8GB
• 12GB
• 16GB
• Supports the following device modes,
• X16
• X32
• Supports for All Mode registers programming.
• Supports for Bank group features.
• Supports for Single ended interface for command, address and data.
• Supports for QDR and DDR operating mode.
• Supports for Programmable read latency and write latency.
• Supports for Write data mask function via address bus.
• Supports for Data bus inversion (DBI) & address bus inversion (ABI).
• Supports for Input/output PLL/DLL.
• Supports for Address training.
• Supports for cyclic redundancy check (CRC-8).
• Supports for Low Power modes.
• Supports for Auto & self refresh modes.
• Supports for Auto precharge option for each burst access.
• Supports for On-die termination (ODT) for all high-speed inputs.
• Supports Mirror function with MF pin.
• Supports IEEE 1149.1 compliant boundary scan.
• Supports for input clock stop and frequency change.
• Fully synthesizable
• Static synchronous design.
• Positive edge clocking and no internal tri-states.
• Scan test ready
• Simple interface allows easy connection to microprocessor/microcontroller devices

• Single site license option is provided to companies designing in a single site.
• Multi sites license option is provided to companies designing in multiple sites.
• Single Design license allows implementation of the IP Core in a single FPGA bitstream and ASIC.
• Unlimited Designs, license allows implementation of the IP Core in unlimited number of FPGA bitstreams and ASIC designs.

• The GDDR5X interface is available in Source and netlist products.
• The Source product is delivered in verilog. If needed VHDL, SystemC code can also be provided.
• Easy to use Verilog Test Environment with Verilog Testcases.
• Lint, CDC, Synthesis, Simulation Scripts with waiver files.
• IP-XACT RDL generated address map.
• Firmware code and Linux driver package.
• Documentation contains User's Guide and Release notes.