Power Management IP for Tower
Welcome to the ultimate
Power Management IP
for
Tower
hub! Explore our vast directory of
Power Management IP
for
Tower
All offers in
Power Management IP
for
Tower
Filter
Compare
13
Power Management IP
for
Tower
from
3
vendors
(1
-
10)
-
CC-100IP-RF Analog and RF Sensitivity Enhancement IP
- Enhances the Sensitivity of Analog and RF Frontend Receivers
- Enhances the PSRR od Analog and RF Frontend Receivers
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
-
Hyper-Decoupling Capacitor with a Capacitance Multiplication, Series Inductance Nullification, Cybersecurity Enhancement and an Energy Harvesting capabilities
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
- On-Chip Cybersecurity Enhancement
- 25% Reduction in Capacitor ESL
-
CC-100IP-PI Power Integrity Enhancement IP
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
- On-Chip Cybersecurity Enhancement
- 25% Reduction in Capacitor ESL
-
CC-100IP-MB Electric Vehicle Mileage Booster IP
- Extends EV Driving range by 10%
- Extends the driving and Biking Range of Electric Vehicles from 16 to 30 Miles
- Occupies the same on chip area as standard DCAPs with at least a 600X effective capacitance increase
- Up to a 36% Dynamic Power and RF Emissions Reduction
-
Custom Regulated High Capacity Charge Pump
- On-Chip Supply Rail Extension
- Extends the headroom and performance range of other on-chip blocks and components
-
120mA 3.3V to 1.8V regulator - TowerJazz 0.18um
- Area: 0.06mm2
- Vin (Input voltage): 3.3V
- Vout (Output voltage): 1.8V
- Imax (Maximum load current): 120mA
-
Low-power bandgap - TowerJazz 0.18um
- Area: 0.081mm2
- Vref (Output reference voltage): 0.7V
- Idd (Current consumption): 13uA
- PSRR (Power supply ripple rejection ratio): 60dB
-
Power-on reset circuit for 1.8V and 3.3V - TowerJazz 0.18um
- Area: 0.024mm2
- Treset (Minimum reset duration): 1ms
- Vth- (Lower threshold): 1.39V
- Vth+ (Higher threshold): 1.53V
-
Low-noise bandgap reference - TowerJazz 0.18um
- Area: 0.031mm2
- Vref (Output reference voltage): 1.14V
- Idd (Current consumption): 40uA
- PSRR (Power supply ripple rejection ratio): 60dB
-
Power On Reset Circuit
- Fully integrated, compact design
- 3.3V output voltage
- 3.3V± 10% power supply
- Area 0.003373mm2