Vendor: MindWay S.r.l. Category: Modulation Demodulation

DAB modulator

The MW_DAB modulator core performs the digital baseband function for the transmission side of new generation Digital Audio Broadc…

Overview

The MW_DAB modulator core performs the digital baseband function for the transmission side of new generation Digital Audio Broadcasting. The MW_DAB core is designed to achieve high performance for a single chip FPGA based design, including control and status management. The modulator core is configurable to supports all several TX modes, 1/2/3/4. It receives as input the MPEG II audio signal and other data, as the information relating to FIB and Channel, and implements the modules to build the DAB modulated signal. Each service is individually coded at source level in the modulator, with error protection and time interleaving. The services are multiplexed in the Main Service Channel (MSC), and finally, Orthogonal Frequency Division Multiplexing (OFDM) is applied to the stream. Internal 20-bit architecture for high level MER and BER performances is provided. The core is implemented to accept up to 16 channels as inputs. A larger capability could be obtained using additional FPGA resources. FPGA netlist only or complete design environment package are deliverable. The core was developed in Vivado tool, written in HDL code.

Key features

  • Fully compliant with ETSI EN 300 401 V1.4.1 2006-06, for DAB
  • DAB-Modes: I, II, III, IV
  • All protection levels supported
  • Synchronous design
  • Supported channels up to 16
  • Max delay < 100 ms, and depending on used DAB-Mode
  • Frequency range : VHF (III) 170 MHz to 254 MHz, L band, with occupied bandwidth 1.536 MHz
  • Network type: SFN
  • Reference Standard : ITU-T G703-G704, EN 300401, EN 300799, EN 302077-2
  • DAB Input Signal : ETI (NI) 2.048 MHz or ETI (NA)
  • Typical MER > 40 dB at overall frequency range
  • Optional Features:
    • Digital linear adaptive pre-correction
    • Digital nonlinear adaptive pre-correction

What’s Included?

  • The following deliverables are available:
    • FPGA netlist and Xilinx ISE or Vivado® Design Suite constraint files
    • User guide
    • Block level design document
    • VHDL test bench and test vectors
  • Optional deliverables:
    • Fully synthesizable VHDL source code
    • Synthesis script for XST
    • tcl script for Vivado® Design Suite

Specifications

Identity

Part Number
MW_DAB
Vendor
MindWay S.r.l.
Type
Silicon IP

Files

Note: some files may require an NDA depending on provider policy.

Provider

HQ: Italy

Learn more about Modulation Demodulation IP core

Three Major Inflection Points for Sourcing Bluetooth Intellectual Property

Synopsys is now shipping support for Bluetooth® 5.4, the latest specification from the Bluetooth SIG (Special Interest Group). The enhancements in Bluetooth 5.4 will open additional markets and use cases. This is one of the many inflection points in the Bluetooth Low Energy market that will be discussed in this paper.

Part 2: Opening the 5G Radio Interface

Carriers are now deploying 5G across the globe driven by the need to keep up with relentless mobile data growth. 5G New Radio (NR) operates at higher frequencies to increase bandwidth, but at the expense of range. There will therefore be a need for a much larger number of 5G RUs to provide the same coverage. The availability of cost-effective, reliable and open 5G radio units is therefore critical.

An Integrated, Tunable RF Filter: an Enabler for Reconfigurable Front-Ends

This paper presents the design and performance of a key RF circuit necessary for the realization of a reconfigurable, integrated RF front-end: a tunable frequency, selectable bandwidth, on-chip, “SAW replacement” filter. The on-die tunable filter presented here has a tunable center frequency up to 1 GHz, a selectable bandwidth up to 40 MHz, and an adjacent channel rejection down to 60 dB.

Design considerations for integrated CMOS receivers

To meet the demands for the multi-band, multi-mode wireless standards in the current market, a highly integrated wireless receiver (RX) is desired. CMOS technology has become the technology of choice for the integrated receiver design.

Silicon IP for Programmable Baseband Processing

An efficient IP reuse strategy relies on IP blocks with wide applicability. That makes generic blocks, such as programmable processors preferable. However, in many applications such as handheld wireless terminals, additional silicon area and power consumption compared to fixed function solutions can not be accepted.

Frequently asked questions about Modulation and Demodulation IP cores

What is DAB modulator?

DAB modulator is a Modulation Demodulation IP core from MindWay S.r.l. listed on Semi IP Hub.

How should engineers evaluate this Modulation Demodulation?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Modulation Demodulation IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP