How to simplify power design development and evaluation for FPGA-based systems
Validation of power supply voltage at the FPGA; real-time monitoring of Vccint power consumption; realistic power estimates using accurate on-die temperature measurement.
Vendor:
Xilinx, Inc.
Category:
Test / Debug
ChipScope Pro IBERT for Virtex-6 FPGA GTX Transceivers
The LogiCORE™ ChipScope™ Pro Integrated Bit Error Ratio Tester (IBERT) core for Virtex®-6 FPGA GTX transceivers can be used to ev…
Overview
The LogiCORE™ ChipScope™ Pro Integrated Bit Error Ratio Tester (IBERT) core for Virtex®-6 FPGA GTX transceivers can be used to evaluate and monitor GTX transceivers. The design includes pattern generators and checkers implemented in FPGA logic, and access to the ports and dynamic reconfiguration port (DRP) attributes of the GTX transceivers. Communication logic is also included to allow the design to be run-time accessible through JTAG. The IBERT core is a self-contained design. When generated, it will run through the entire implementation flow, including bit stream generation.
Key features
- Provides a communication path between the ChipScope Pro Analyzer software and the IBERT core
- Contains a user-selectable number of Virtex-6 GTX Transceivers
- Transceiver can be customized for the desired line rate, reference clock rate, reference clock source, and data path width
- Requires a system clock that can be sourced from a pin or one of the enabled GTX transceivers
Specifications
Identity
Part Number
ChipScope Pro IBERT for Virtex-6 FPGA GTX Transceivers
Vendor
Xilinx, Inc.
Type
Silicon IP
Files
Note: some files may require an NDA depending on provider policy.
Provider
HQ:
USA
Learn more about Test / Debug IP core
Using advanced logging techniques to debug & test SystemVerilog HDL code
How to use advanced logging techniques to fill in a critical gap in the debug and analysis of SystemVerilog testbench code and replace the manual gathering and analysis of text log files
Metric Driven Validation, Verification and Test of Embedded Software
Today’s complexity of embedded systems is steadily increasing. The growing number of components in a system and the increased communication and synchronization of all components requires reliable verification, validation and testing of each component as well as the system as a whole. Considering today’s cost sensitivity it is important to find errors as early as possible and to increase the degree of test automation to avoid quality losses because of the increased cost pressure.
Tools for Test and Debug : Embedded designers face a myriad of multiprocessor challenges
Tools for Test and Debug : Embedded designers face a myriad of multiprocessor challenges
Securing Scale-Up AI: Cadence’s Complete UALink Solution
As an early contributor to the UALink ecosystem, Cadence delivers a production-ready solution built for real-world AI deployments. By combining high-performance connectivity IP with integrated security, Cadence enables customers to scale AI infrastructure with confidence.
eUSB2V2: Trends and Innovations Shaping the Future of Embedded Connectivity
In an era defined by rapid technological advancement, embedded interfaces must evolve to meet the demands of smaller form factors, lower power budgets, and diversified use cases. Among these interfaces, eUSB2V2 (Embedded USB 2.0 Version 2) has emerged not just as a legacy-support PHY, but as a strategic enabler of robust, low-power connectivity across next-generation systems-on-chip (SoCs).
Frequently asked questions about SerDes Test / Debug IP cores
What is ChipScope Pro IBERT for Virtex-6 FPGA GTX Transceivers?
ChipScope Pro IBERT for Virtex-6 FPGA GTX Transceivers is a Test / Debug IP core from Xilinx, Inc. listed on Semi IP Hub.
How should engineers evaluate this Test / Debug?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Test / Debug IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.