Amplifier linearization promotes efficiency in multi-carrier WCDMA basestation
Amplifier linearization promotes efficiency in multi-carrier WCDMA basestation
Vendor:
RFIC Solutions, Inc.
Category:
Amplifier
Buffer Amplifier operating from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier.
RFBA01C Buffer Amplifier operates from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifie…
Overview
RFBA01C Buffer Amplifier operates from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. The amplifier provides 10.1 dB small signal gain and 9.6 dBm of Output P1dB. The input and output are matched to 50 ohms with on-chip DC blocking capacitors. The device is specifically designed to use in point-to-point radios for cellular backhaul Application, 5G RF Transceiver & SATCOM. The technology used to design DA is 0.1um GaAs pHEMT process. Results are shown in datasheet with all parasitics & coupling effects at desired frequency.
Key features
- RF Frequency 25-62.5 GHz
- Gain of 10.1 dB
- Output P1dB of 9.6 dBm
- Noise Figure of 6 dB
- OIP3 is 18.1 dBm
- Output Saturated Power: 16.3 dBm
- Bias: VDD1=VDD2=VDD3=VDD4=4V,
- VGG1=VGG2=VGG3=VGG4= -0.4V, ID=145.7 mA
- Die size: 1.15 mm x 1.95 mm
Block Diagram
RFBA01C block diagram
Benefits
- Flat gain over band
- Low current
- 50 ohm input and output match
- Low cost
- IP can be ported to 65 nm Si/CMOS node
Applications
- Satellite Communication
- Point to point communication system
- Backhaul Application
- IoT
What’s Included?
- Schematic and NetList
- Abstract Model (.lib file)
- Layout View (Optional)
- Behavioral model (Circuit & EM Simulation)
- Extracted View (Optional)
- GDSII
- DRC, LVS, Antenna report
- Test bench with saved configuration (Optional)
- Documentation
Specifications
Identity
Part Number
RFBA01C
Vendor
RFIC Solutions, Inc.
Type
Silicon IP
Provider
HQ:
United States
Learn more about Amplifier IP core
Designing the Beam Steering Core for a C-Band AESA: A Look at VSI's VBF0644 GaAs Beamformer IC
Among the four building blocks of an AESA T/R module — power amplifier, low-noise amplifier, T/R switch, and beamformer IC — the beamformer is the one that most directly determines system-level radar performance.
Powering the Future of RF: Falcomm and GlobalFoundries at IMS 2025
GF’s comprehensive RF portfolio, including our industry-leading RFSOI, SiGe, 22FDX+ and RF GaN platforms, is purpose-built to push the boundaries of what’s possible in connectivity, but we’re not doing it alone. Together with innovative partners like Falcomm, we’re moving the industry forward, providing our customers with cutting-edge solutions to enhance performance, power and integration and create connected technologies with higher signal quality, better efficiency and longer battery life.
Real-Time ESD Monitoring and Control in Semiconductor Manufacturing Environments With Silicon Chip of ESD Event Detection
Integrated circuits are susceptible to electrostatic discharge (ESD) events. Real-time detection and alerting of ESD events in semiconductor manufacturing environments is the key to achieving well ESD control. Additionally, the magnitude and duration of an ESD event are strongly correlated with the specific type of ESD events.
Novel Trade-offs in 5 nm FinFET SRAM Arrays at Extremely Low Temperatures
Linearity Analysis of Source-Degenerated Differential Pairs for Wireline Applications
This paper presents a comprehensive analysis of nonlinearities in differential pairs with source degeneration and their impact on wireline communication applications.
Frequently asked questions about Amplifier IP cores
What is Buffer Amplifier operating from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier.?
Buffer Amplifier operating from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. is a Amplifier IP core from RFIC Solutions, Inc. listed on Semi IP Hub.
How should engineers evaluate this Amplifier?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Amplifier IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.