Clocking and timing IP cores are fundamental to semiconductor designs that require accurate clock generation, distribution, synchronization, and timing control. This category includes PLLs, DLLs, oscillators, and clock generators used in SoCs, ASICs, SerDes subsystems, processors, memory interfaces, and communication devices.
Browse clocking and timing IP from multiple vendors to compare jitter, frequency range, locking behavior, power consumption, programmability, and process support. Semi IP Hub helps chip architects and design engineers identify the right timing IP for high-performance and low-power silicon platforms.
UMC L28HLP 28nm DDR DLL - 246MHz-1230MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise f…
UMC L28HPM 28nm DDR DLL - 150MHz-750MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise f…
UMC L28HPM 28nm DDR DLL - 200MHz-1000MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise f…
UMC L28HPM 28nm DDR DLL - 316MHz-1580MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise f…
UMC L28HLP 28nm Spread Spectrum PLL - 96MHz-481MHz
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreadin…
UMC L28HLP 28nm Spread Spectrum PLL - 192MHz-962MHz
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreadin…
UMC L28HLP 28nm Spread Spectrum PLL - 384MHz-1920MHz
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreadin…
UMC L28HPM 28nm Spread Spectrum PLL - 150MHz-750MHz
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreadin…
UMC L28HPM 28nm Spread Spectrum PLL - 300MHz-1500MHz
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreadin…
UMC L28HPM 28nm Spread Spectrum PLL - 600MHz-3000MHz
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreadin…
UMC L28HLP 28nm General Purpose PLL - 220MHz-1100MHz
The General Purpose PLL is a wide range clock multiplier with deskew capability.
UMC L28HPM 28nm General Purpose PLL - 350MHz-1750MHz
The General Purpose PLL is a wide range clock multiplier with deskew capability.
TSMC CLN80GC 80nm General Purpose PLL - 160MHz-800MHz
The General Purpose PLL is a wide range clock multiplier with deskew capability.
TSMC CLN80GT 80nm General Purpose PLL - 250MHz-1250MHz
The General Purpose PLL is a wide range clock multiplier with deskew capability.
TSMC CLN80HS 80nm General Purpose PLL - 250MHz-1250MHz
The General Purpose PLL is a wide range clock multiplier with deskew capability.
UMC L28HLP 28nm Deskew PLL - 110MHz-550MHz
The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference.
UMC L28HLP 28nm Deskew PLL - 220MHz-1100MHz
The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference.
UMC L28HLP 28nm Deskew PLL - 440MHz-2200MHz
The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference.
UMC L28HPM 28nm Deskew PLL - 175MHz-875MHz
The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference.
UMC L28HPM 28nm Deskew PLL - 350MHz-1750MHz
The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference.