Amplifier linearization promotes efficiency in multi-carrier WCDMA basestation
Amplifier linearization promotes efficiency in multi-carrier WCDMA basestation
Vendor:
NTLab
Category:
Amplifier
1220 to 1610 MHz Low noise amplifier
Low noise amplifier (LNA) is usually used as the first stage of receivers and is characterized by low noise figure and high linea…
Overview
Low noise amplifier (LNA) is usually used as the first stage of receivers and is characterized by low noise figure and high linearity. LNA is based on a cascade circuit with output resonant circuit. The external elements are used matching the output to 50 Ohm and for frequency range adjustment.
The block is fabricated on iHP SiGe BiCMOS 0.25 um (SGB25V) technology.
Key features
- iHP SGB25V
- Operating frequency range 1220…1610 MHz
- High gain
- Low noise figure
- Very high linearity
- Current source type: temperature dependent or temperature independent
- Portable to other technologies (upon request)
Block Diagram
250iHP_LNA_01 block diagram
Applications
- Front-end HF signal amplification in receivers
What’s Included?
- Schematic or NetList
- Abstract model (.lef and .lib files)
- Layout view (optional)
- Behavioral model (Verilog)
- Extracted view (optional)
- GDSII
- DRC, LVS, antenna report
- Test bench with saved configurations (optional)
- Documentation
Specifications
Identity
Part Number
250iHP_LNA_01
Vendor
NTLab
Type
Silicon IP
Files
Note: some files may require an NDA depending on provider policy.
Provider
HQ:
Lithuania
Learn more about Amplifier IP core
Designing the Beam Steering Core for a C-Band AESA: A Look at VSI's VBF0644 GaAs Beamformer IC
Among the four building blocks of an AESA T/R module — power amplifier, low-noise amplifier, T/R switch, and beamformer IC — the beamformer is the one that most directly determines system-level radar performance.
Powering the Future of RF: Falcomm and GlobalFoundries at IMS 2025
GF’s comprehensive RF portfolio, including our industry-leading RFSOI, SiGe, 22FDX+ and RF GaN platforms, is purpose-built to push the boundaries of what’s possible in connectivity, but we’re not doing it alone. Together with innovative partners like Falcomm, we’re moving the industry forward, providing our customers with cutting-edge solutions to enhance performance, power and integration and create connected technologies with higher signal quality, better efficiency and longer battery life.
Real-Time ESD Monitoring and Control in Semiconductor Manufacturing Environments With Silicon Chip of ESD Event Detection
Integrated circuits are susceptible to electrostatic discharge (ESD) events. Real-time detection and alerting of ESD events in semiconductor manufacturing environments is the key to achieving well ESD control. Additionally, the magnitude and duration of an ESD event are strongly correlated with the specific type of ESD events.
Novel Trade-offs in 5 nm FinFET SRAM Arrays at Extremely Low Temperatures
Linearity Analysis of Source-Degenerated Differential Pairs for Wireline Applications
This paper presents a comprehensive analysis of nonlinearities in differential pairs with source degeneration and their impact on wireline communication applications.
Frequently asked questions about Amplifier IP cores
What is 1220 to 1610 MHz Low noise amplifier?
1220 to 1610 MHz Low noise amplifier is a Amplifier IP core from NTLab listed on Semi IP Hub.
How should engineers evaluate this Amplifier?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Amplifier IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.