112G SerDes USR & XSR

This MIPI D-PHY IP is designed to compliant with the MIPI D-PHY v1.2 specifications. It is designed for low power and high-performance application. This IP supports data rate up to 2.5Gbps.

• 8 Channels per Macro, 2.5Gbps~112Gbps with TX/RX independent; NRZ Data Rate:2.5-56Gbps PAM4 Data Rates: 56-112Gbps
• Serialization/Deserialization interface width; PCS-User interface support 64bit in PIPE
• Two cascaded PLLs, one LC-tank based and the other ring-oscillator based
• Digitally-control-impedance termination resistors
• Configurable TX output differential voltage swing
• Built-in TX De-Emphasis
• RX Built-in CTLE with programmable boost
• Support Forward Clock Mode/Common Clock/CDR Assist mode
• PLL Frequency Lock detection
• Multiple Loop Back, BIST, and Analog DC Testing
• Support RX Built-in Eye Opening Monitor
• Reference clock repeater for other Quads
• Support Boundary Scan Interface for Serial link, compliant with IEEE 1149.6-2003/ 1149.1-2001
• BIST generator and checker
• Support data polarity inversion
• TX/RX status control
• Provide the corresponding interface clocks to external SOC
• Power on/reset sequence control
• Support DFT
• JTAG/APB control register access interface
• Supports Flip-Chip package

• GDSII&CDL Netlist
• Verilog Model
• LEF Layout Abstract(.LEF)
• Liberty Timing Models(.lib)
• Verify Results
• Specification
• Datasheet
• Integration Guideline
• Evaluation Plan
• Leading support for package design, SI&PI modeling and production test development