What is 11 to 25 MHz Band-pass filter?
11 to 25 MHz Band-pass filter is a Filters IP core from NTLab listed on Semi IP Hub. It is listed with support for smic Silicon Proven.
Vendor:
NTLab
Category:
Filters
11 to 25 MHz Band-pass filter
Bandpass filter (BPF) is two coupled circuits with capacitive external coupling.
Overview
Bandpass filter (BPF) is two coupled circuits with capacitive external coupling. There are two modes for cut-off frequency programming: manually or automatically. In automatic mode one of the circuits is used in an oscillator mode therewith the oscillation frequency correlates with the BPF central frequency.
BPF operates in narrowband (GPS) or wideband (Galileo) modes with a bandwidth of 3 MHz and 5 MHz, respectively.
There are 4 operation modes with different rated signal level under the same value of distortion. Greater level of signal corresponds to a higher current consumption.
The block is fabricated on SMIC CMOS 0.18 um technology.
Key features
- SMIC CMOS 0.18 um
- Wide cut-off frequency adjustment range (11 MHz…25 MHz)
- Programmable bandwidth
- Narrowband and wideband modes (3 MHz, 5 MHz)
- Automatic cut-off frequency adjustment system
- There are 4 operation modes
- No external components required
- Portable to other technologies (upon request)
Block Diagram
180SMIC_BPF_01 block diagram
Benefits
- Intermediate frequency signal processing
- Navigation systems
Applications
- Intermediate frequency signal processing
- Navigation systems
What’s Included?
- Schematic or NetList
- Abstract model (.lef and .lib files)
- Layout view (optional)
- Behavioral model (Verilog)
- Extracted view (optional)
- GDSII
- DRC, LVS, antenna report
- Test bench with saved configurations (optional)
- Documentation
Silicon Options
| Foundry | Node | Process | Maturity |
|---|---|---|---|
| SMIC | 180nm | G | Silicon Proven |
Specifications
Identity
Part Number
180SMIC_BPF_01
Vendor
NTLab
Type
Silicon IP
Files
Note: some files may require an NDA depending on provider policy.
Provider
HQ:
Lithuania
Frequently asked questions about filter IP cores
How should engineers evaluate this Filters?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Filters IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.