Vendor: Synopsys, Inc. Category: PCI Express

PCIe 2.0 PHY in GF (40nm, 28nm, 22nm, 12nm)

The multi-channel Synopsys PHY IP for PCI Express® 2.1/1.1 includes Synopsys’ high-speed, high-performance transceiver to meet to…

Contact Provider Request Datasheet
GlobalFoundries 12nm LP Available on request View all specifications

Overview

The multi-channel Synopsys PHY IP for PCI Express® 2.1/1.1 includes Synopsys’ high-speed, high-performance transceiver to meet today’s demands for higher bandwidth. The PHY provides a cost-effective solution that is designed to meet the needs of today’s PCI Express (PCIe®) designs while being extremely low in power and area.
Using leading-edge design, analysis, simulation, and measurement techniques, Synopsys delivers exceptional signal integrity and jitter performance that exceeds the PCI Express standard’s electrical specifications. The high-margin, robust PHY architecture tolerates process, voltage, and temperature (PVT) manufacturing variations and is implemented with standard CMOS digital process technologies.
The multi-tap transmitter and receiver equalizers, along with the advanced built-in diagnostics and ATE test vectors, enable customers to control, monitor
and test for signal integrity without the need for expensive test equipment. This provides on-ch°ip visibility into actual link and channel performance to quickly improve signal integrity, reducing both product development cycles and the need for costly field support.

Key features

  • Physical coding sublayer (PCS) block with PIPE interface
  • Supports PCIe power management features, including L1 substate
  • Power gating for lowest standby power
  • Low active power using voltage mode TX with under drive supply options
  • The multi-channel PHY macro with single clock and control core for higher density
  • Supports both internal and external reference clock inputs
  • PIPE bifurcation as well as PHY macro aggregation for x8 and x16 PHY configurations
  • Multi-featured transmitter and receiver equalization
  • Each lane in a multi-channel PHY macro contains its own pseudo random bit sequencer (PRBS) for internal and external loopbacks, used to verify TX and RX circuitry
  • Each channel is fully controllable via the test access port (TAP) and core interface
  • The PHY IP is capable of mapping the signal eye, and outputs the signal statistics via JTAG interface

Benefits

  • Compliant with the PCI Express 2.1, 1.1, and PIPE specifications
  • x1, x2, x4, x8, x16 lane configurations with bifurcation
  • PCIe L1 substate power management
  • Supports power gating and power island
  • Embedded bit error rate tester (BERT) and internal eye monitor
  • ATE test vectors for complete, at-speed production testing
  • Pseudo random bit sequencer (PRBS) generation and checker
  • IEEE 1149.6 AC JTAG Boundry Scan
  • Beaconing, receiver detection and electrical idle features
  • Supports -40°C to 125°C junction temperatures

Applications

  • Desktops, laptops, workstations and servers
  • Embedded systems and set-top boxes
  • Network switches and routers
  • Enterprise computing and storage networks
  • Consumer portable devices
  • Graphics devices
  • Wireless devices

What’s Included?

  • Verilog models
  • Liberty timing views (.lib)
  • LEF abstracts (.lef)
  • CDL netlist (.cdl)
  • GDSII
  • ATPG models
  • IBIS-AMI models
  • HSPICE models for TX and RX
  • Documentation

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Silicon Options

Foundry Node Process Maturity
GlobalFoundries 12nm LP Available on request

Specifications

Identity

Part Number
dwc_pcie2phy_gf
Vendor
Synopsys, Inc.

Provider

Synopsys, Inc.
HQ: USA
Synopsys is a leading provider of high-quality, silicon-proven semiconductor IP solutions for SoC designs. The broad Synopsys IP portfolio includes logic libraries, embedded memories, analog IP, wired and wireless interface IP, security IP, embedded processors and subsystems. To accelerate IP integration, software development, and silicon bring-up, Synopsys’ IP Accelerated initiative provides architecture design expertise, pre-verified and customizable IP subsystems, hardening, and signal/power integrity analysis. Synopsys' extensive investment in IP quality, comprehensive technical support and robust IP development methodology enables designers to reduce integration risk and accelerate time-to-market.
Contact Synopsys, Inc.

Learn more about PCI Express IP core

Frequently asked questions about PCIe IP cores

What is PCIe 2.0 PHY in GF (40nm, 28nm, 22nm, 12nm)?

PCIe 2.0 PHY in GF (40nm, 28nm, 22nm, 12nm) is a PCI Express IP core from Synopsys, Inc. listed on Semi IP Hub. It is listed with support for globalfoundries Available on request.

How should engineers evaluate this PCI Express?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this PCI Express IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP