Power optimization can extend the battery life in your portable multimedia system
Rajendra Turakani and Krishna Kumar, Ittiam Systems
Jan 02, 2006 (5:00 AM), CommsDesign
A key measurement in a portable media player (PMP) is the time duration that it can play multimedia content from a fully charged battery (Fig. 1). With the available board area decreasing considerably and feature set increasing rapidly, designers must implement systematic power optimization strategies in both hardware and software to maximize battery life.
Saving 10 mA of current on a media player (with typical current consumption of 450 mA) while deriving power from 1800-mAh battery could increase run time by 6 min. The same figures for an audio only player (without hard disk and the full-function display replaced with a 225-mA graphic LCD) would be 22 min.
The first step in power optimization is power characterization, which helps the designer implement the strategies in an effective, methodical way (Fig. 2). For example, the hard disk uses a mechanical motor. Hence, it consumes lot of power. The latest hard disks come with many power optimization options, including different modes in which the disk can be operated, each having its own power requirement (see the table).
To read the full article, click here
Related Semiconductor IP
- TSMC 7nm 0V75 / 0V9 ESD Local Clamp – Low Cap
- TSMC 65nm 3V3 ESD Local Clamp – Rad Hard
- TSMC 5nm 1V8, 1.2V and 0.9V ESD Local Protection – Low Cap
- TSMC 3nm 3V3 ESD Local Clamp
- TSMC 3nm 1V2 ESD Local Clamp – Low Capacitance
Related Articles
- How Low Can You Go? Pushing the Limits of Transistors - Deep Low Voltage Enablement of Embedded Memories and Logic Libraries to Achieve Extreme Low Power
- Upskill Your Smart Soldiers and Conquer the ChipWar in Style!
- The pivotal role power management IP plays in chip design
- Unlocking the Power of Digital Twins in ASICs with Adaptable eFPGA Hardware
Latest Articles
- LACE: Large Language Model Aided Multi-Agent Framework for Agile RISC-V Instruction Extension
- A Process-Aware Hybrid Si/IGO Monolithic-3D 6T SRAM with BEOL Pass-Gates for the 2nm Node
- Automated Estimation of MBIST Area and Test Time in Heterogeneous Memory IPs via Stacked Ensemble Framework
- VIPER: Architecture-Aware Performance Modeling for Processing-in-Memory Design-Space Exploration
- CTTE: An Open Dual-Protocol RISC-V Trace Encoder for N-Trace and E-Trace