Multimode sensor processing using Massively Parallel Processor Arrays (MPPAs)
By Paul Chen and Mike Butts, Ambric
March 18, 2008 -- pldesignline.com
Multi-mode sensor processing – such as that for radar beamforming and for electro- optical (E-O) or infrared (IR) image processing – presents formidable computing problems. It requires extremely high data throughput and processing power, which requirements change dynamically with operating conditions.
Multi-mode sensor processing has traditionally been implemented using DSPs or FPGAs, but their lack of run-time programmability and re-configurability forces the worst-case design for each type of device. This creates a tremendous need for a solution that is upwardly scalable, reconfigurable, and programmable, all while reducing development costs and time to market.
The Massively Parallel Processor Array (MPPA) solution
Ambric (www.ambric.com) has developed a new computing architecture and device – a Massively Parallel Processor Array (MPPA) – that can be reconfigured in real time to adapt on-demand to the dynamic computational and functional requirements of multi-mode sensor platforms.
Performance of up to one TeraOPS
The ultra-high-performance Ambric Am2045 MPPA features 336 32-bit RISC processors delivering up to one teraOPS processing speed. It also features programmable 32-bit communication fabric for high-performance inter-processor connections. The Am2045 also includes a four-lane PCI Express interface and four GPIO ports, with an aggregate I/O bandwidth of 29 Gbps per second.
Scalability with no need to change design methodology
The Ambric Am2045 MPAA may be scaled to application requirements simply by reallocating computing resources (processors and/or memories) available within the chip or across multiple chips. The Ambric Structural Object Programming Model enables applications to add or reconfigure resources with no major design overhaul. This keeps development on schedule.
March 18, 2008 -- pldesignline.com
Multi-mode sensor processing – such as that for radar beamforming and for electro- optical (E-O) or infrared (IR) image processing – presents formidable computing problems. It requires extremely high data throughput and processing power, which requirements change dynamically with operating conditions.
Multi-mode sensor processing has traditionally been implemented using DSPs or FPGAs, but their lack of run-time programmability and re-configurability forces the worst-case design for each type of device. This creates a tremendous need for a solution that is upwardly scalable, reconfigurable, and programmable, all while reducing development costs and time to market.
The Massively Parallel Processor Array (MPPA) solution
Ambric (www.ambric.com) has developed a new computing architecture and device – a Massively Parallel Processor Array (MPPA) – that can be reconfigured in real time to adapt on-demand to the dynamic computational and functional requirements of multi-mode sensor platforms.
Performance of up to one TeraOPS
The ultra-high-performance Ambric Am2045 MPPA features 336 32-bit RISC processors delivering up to one teraOPS processing speed. It also features programmable 32-bit communication fabric for high-performance inter-processor connections. The Am2045 also includes a four-lane PCI Express interface and four GPIO ports, with an aggregate I/O bandwidth of 29 Gbps per second.
Scalability with no need to change design methodology
The Ambric Am2045 MPAA may be scaled to application requirements simply by reallocating computing resources (processors and/or memories) available within the chip or across multiple chips. The Ambric Structural Object Programming Model enables applications to add or reconfigure resources with no major design overhaul. This keeps development on schedule.
To read the full article, click here
Related Semiconductor IP
- MACsec Engine optimized for 10Base-T1S/T1L applications
- Dual Port, Voltage Scaling Register File Compiler on GF22FDX+
- Single Port, Voltage Scaling, High Speed SRAM Memory Compiler on GF22FDX+
- I3C Full Controller / Target
- I3C HCI Host Controller
Related Articles
- Massively parallel frameworks for in-design verification
- Gate arrays getting a new lease on life
- Customized DSP -> Parallel DSPs: speed at a price
- Reconfigurable arrays of processors needed for wireless multimedia
Latest Articles
- PVTSizing 2.0: A Fast and Reliable Analog Circuit Sizing Operator for Agentic EDA Workflows
- An Agentic Python Framework for LLM-Driven UVM Testbench Synthesis with Closed-Loop Compiler Feedback
- Reconfiguring System-Level Protection Through Bounded Delegation in RISC-V MCUs
- SkipLane: Write-Once, Conflict-Free Accumulation for Zero-Skipping CNN Engines on FPGAs
- Priority-Aware Deficit Round Robin for AXI4 Bandwidth Fairness in ASAP-7nm Process