How to design secure USB-based dongles
Dhanraj Rajput, Cypress Semiconductor
EETimes (12/21/2011 11:48 AM EST)
The many advantages of USB Flash drives have led to their widespread use for data storage through every industry. However, given that these drives are highly portable, care must be taken to protect private and sensitive data from theft and accidental loss of the drives.
USB Flash drives that implement security features are generally called USB secure dongles or secure dongles. There are various ways to design a secure dongle and the best secure dongle for a specific application balances system cost with the level of security required for a particular application. This article describes techniques for designing secure dongles.
To read the full article, click here
Related Semiconductor IP
- Ultra Ethernet MAC & PCS 100G/200G/400G/800G
- Ethernet PCS 100G/200G/400G/800G/1.6T
- Ethernet MAC 100G/200G/400G/800G/1.6T
- Junction Over-Temperature Detector with Linear Centigrade-to-Voltage Output - X-FAB XT018
- Performance P570 Gen 3
Related Articles
- How to Design Secure SoCs: Essential Security Features for Digital Designers
- How to design secure SoCs, Part II: Key Management
- How to design secure SoCs, Part III: Secure Boot
- How to design secure SoCs Part IV: Runtime Integrity Protection
Latest Articles
- Closer in the Gap: Towards Portable Performance on RISC-V Vector Processors
- TTP: A Hardware-Efficient Design for Precise Prefetching in Ray Tracing
- Heterogeneous SoC Integrating an Open-Source Recurrent SNN Accelerator for Neuromorphic Edge Computing on FPGA
- A Reconfigurable Multiplier Architecture for Error-Resilient Applications in RISC-V Core
- ObfAx: Obfuscation and IP Piracy Detection in Approximate Circuits