Building advanced Cortex-M3 applications
By Jean J Labrosse (Micrium), Lotta Frimanson and Anders Lundgren (IAR Systems)
Embedded.com (10/29/09, 08:04:00 AM EDT)
The ARM Cortex-M3 architecture provides many improvements compared with its predecessor, the popular ARM7/9, and is designed to be particularly suitable for cost-sensitive embedded applications that require deterministic system behavior.
It's a member of the Cortex-M family, one of the three ARM Cortex architectures that were introduced to the embedded marketplace in 2004, and is being integrated into low-cost embedded microcontrollers (MCUs) from an increasing number of silicon vendors.
A comparison of the main characteristics of Cortex-M3 with those of ARM7/9 is shown in Table 1 below. The Cortex-M3 improves on the ARM7/9 in most qualitative estimates " simpler stack architecture, better interrupt controller, and higher-performance instruction set, as well as enhanced debug capabilities, all of which can significantly affect end-product performance.
To read the full article, click here
Related Semiconductor IP
- Zigbee Transceiver PHY
- Data Flow Architecture IP
- AMBA SPI Controller MRAM Controller
- Ethernet MAC
- Protocol Bridges
Related Articles
- Migrating ARM7 code to a Cortex-M3 MCU
- Introducing ARM Cortex-M23 and Cortex-M33 Processors with TrustZone for ARMv8-M
- Amba bus may move MIPS into ARM territory
- Rapidly Implementing Synthesizable ARM IP (By Alan Gibbons, Synopsys and John Biggs, ARM)
Latest Articles
- A Low-Latency ASIC Architecture for Real-Time Line Segment Detection
- BitFair: A 12nm Bit-Serial CNN Accelerator with Learnable Early Termination and Adaptive Bit Ordering for Ultra-Low-Power XR Vision
- A Flexible Sparsity-Aware FPGA Accelerator with Column-Wise Compression for Efficient CNN Inference
- Reducing Instruction-Fetch Energy in RISC-V for Embedded AI Processing via Dynamic and Static Loop Caching
- SPARC: Automated Root-Cause Analysis of Pre-Silicon Power Side-Channel Leakage in the Processor Design Flow