RF Engines contracted by Australia's Defence Science and Technology Organisation (DSTO)
Polyphase filtering designs for FPGA provides performance boost for DSTO’s advanced receiver design.
April 10, 2006 -- RF Engines (RFEL), the experts in signal processing for FPGA, have been awarded a contract by Australia’s Defence Science and Technology Organisation (DSTO), for the provision of high performance digital filter designs. The designs, which form a key role in an advanced receiver systemsi, build on RFEL’s existing portfolio of signal processing intellectual property (IP), and deliver high quality filtering of wideband signals in real-time.
RFEL will provide DSTO with two filter designs, each based on frequency domain filtering techniques using the polyphase DFT. The first design will support a continuous complex sample rate of 200 MHz with 512 frequency domain weights, whilst the second design will support complex samples rates over 150 MHz with 4096 weights. The filter shapes are fully reprogrammable, and can be changed whilst the filter is running without loss of data.
Both designs are targeted at the Altera EP1S80 FPGA, a relatively small device for the level of performance being achieved.
“We are delighted that DSTO have selected RF Engines’ signal processing technology for this leading edge development,” said John Summers, RF Engines’ CEO. “It is a further example of our system design capabilities, and shows how we are able to provide rapid and cost-effective solutions to the most demanding signal processing challenges.”
Frequency Domain Filtering
Frequency domain techniques permit efficient implementation of traditional FIR filter functionality and are based on an analysis stage to convert the incoming signal to the frequency domain, and a synthesis stage to convert back to the time domain. The actual filtering process takes place in the frequency domain where it can be performed very efficiently.
The analysis-synthesis “pair” is typically implemented with a Fast Fourier Transform (FFT) and an Inverse FFT. However, for this contract, RF Engines will be using the Polyphase DFT, which can be considered as a superior replacement to the FFT since it provides far greater frequency isolation between frequency bins for the same transform length. This feature is particularly useful in a filter design, since it allows efficient implementation of very sharp transition bands, and hence greater filter performance for a given silicon resource budget.
For comparative purposes, the polyphase filter design with 4096 frequency domain weights will provide performance equivalent to a FIR filter with 16K taps. At the sample rates required by DSTO, this is well beyond the scope of a single FPGA implementation if attempted with traditional time domain convolution techniques.
Modelling
This work follows on from an initial study phase, in which RFEL was contracted by DSTO to investigate the feasibility of the filter implementation, and to produce bit true Matlab models of the filters. “We find that producing accurate simulation models is a crucial step in our design flow, since it allows customers to test out the design prior to the implementation stage, dramatically reducing any risk”, added John Summers.
Defence Science and Technology Organisation
The Defence Science and Technology Organisation (DSTO) is part of Australia’s Department of Defence. DSTO’s role is to ensure the expert, impartial and innovative application of science and technology to the defence of Australia and its national interests.
RF Engines Limited
RF Engines Limited (RFEL) is a UK based designer, providing high specification signal processing solutions for FPGA, and turnkey receiver solutions for the homeland security, defence, communications and instrumentation markets. Applications include wireless and wireline base stations, satellite communications systems, test and measurement instrumentation, and bespoke wideband receivers.
Related Semiconductor IP
- MACsec Engine optimized for 10Base-T1S/T1L applications
- Dual Port, Voltage Scaling Register File Compiler on GF22FDX+
- Single Port, Voltage Scaling, High Speed SRAM Memory Compiler on GF22FDX+
- I3C Full Controller / Target
- I3C HCI Host Controller
Related News
- Rheinmetall Defence contract RF Engines for complex Signal Processing Design
- RF Engines contracted to supply signal processing cores to leading mobile telecommunications company
- RF Engines studies advanced signal processing techniques for the UK Ministry of Defence (MoD)
- Rheinmetall Defence contract RF Engines for an FPGA based Flexible Channeliser and integrated Spectrum Analyser
Latest News
- Cyient Semiconductors Secures Strategic Investment from GlobalFoundries
- JEDEC® Previews Next-Generation DDR6 DRAM: Higher Performance, Greater Capacity, Improved Power Efficiency and Data-Center-Class Reliability
- INTELPRO Adopts Andes AX46MPV Flagship Multicore Vector Processor and AndesAIRE™ AnDLA™ I370 to Power Next-Generation Heterogeneous AI and Robotics Solutions
- VeriSilicon Introduces Low-Power, High-Performance Wearable Subsystem Solution for Next-Generation AI/AR Glasses
- IC Manage Announces MCP Server for GDP-AI Design and IP Management System