ProMOS Debuts First 90nm Silicon with High Yield
July 13, 2005 -- ProMOS Technologies (5387.TWO) today announced that the first pilot lot by 90nm stack technology node at ProMOS 300mm Fab 3 has successfully wafered out with yield above 60%. ProMOS is the very first Taiwan DRAM company to achieve this breakthrough with high yield on the pilot wafers. This superior performance showcases ProMOS’ excellence in technological advancement and marks a significant milestone in leading-edge 90nm process technology.
This is the first pilot product of 512Mb DRAM by 90nm stack process technology at ProMOS 300mm Fab 3. With completion of functional test on July 8, 2005, the yielding die of 512Mb DRAM also demonstrates the first chip out by 90nm process technology at ProMOS 300mm Fab 3.
Since groundbreaking construction commencement in April 2004, the first wafer has already shown impressed yield performance at 300mm Fab 3 within 14 months, further illustrating ProMOS’ fab operating efficiency and technological competency.
Based on this preliminary success, ProMOS will continue the manufacturing process and product verifications according to the planned schedule. Projected wafer starts of 15K/month and 30k/month are to be executed by Q106 and Q406, respectively.
About ProMOS
ProMOS Technologies, Hsin-chu, Taiwan, is a full-blown memory solution provider and is renowned in the global DRAM industry for its outstanding performance in manufacturing excellence and technology advancement. The company manufactures high-performance and high-density commodity DRAM memory chips as well as pseudo-SRAM, lower power SDRAM and MCM products. ProMOS is listed on Taiwan GreTai Securities Market. For more information, please visit www.promos.com.tw.
This is the first pilot product of 512Mb DRAM by 90nm stack process technology at ProMOS 300mm Fab 3. With completion of functional test on July 8, 2005, the yielding die of 512Mb DRAM also demonstrates the first chip out by 90nm process technology at ProMOS 300mm Fab 3.
Since groundbreaking construction commencement in April 2004, the first wafer has already shown impressed yield performance at 300mm Fab 3 within 14 months, further illustrating ProMOS’ fab operating efficiency and technological competency.
Based on this preliminary success, ProMOS will continue the manufacturing process and product verifications according to the planned schedule. Projected wafer starts of 15K/month and 30k/month are to be executed by Q106 and Q406, respectively.
About ProMOS
ProMOS Technologies, Hsin-chu, Taiwan, is a full-blown memory solution provider and is renowned in the global DRAM industry for its outstanding performance in manufacturing excellence and technology advancement. The company manufactures high-performance and high-density commodity DRAM memory chips as well as pseudo-SRAM, lower power SDRAM and MCM products. ProMOS is listed on Taiwan GreTai Securities Market. For more information, please visit www.promos.com.tw.
Related Semiconductor IP
- MACsec Engine optimized for 10Base-T1S/T1L applications
- Dual Port, Voltage Scaling Register File Compiler on GF22FDX+
- Single Port, Voltage Scaling, High Speed SRAM Memory Compiler on GF22FDX+
- I3C Full Controller / Target
- I3C HCI Host Controller
Related News
- LogicVision Debuts Easy to Use Nanometer Test Solution for Higher Yield Quality, Lower Cost-of-Test and Faster Time-to-Market
- ProMOS pulls in 90nm mass production schedule, fueling 2H’05 operating performance
- Genesys Testware Adds Support for Fuse Arrays to Improve the Yield of Embedded Memories
- Lexra Debuts Lx4380: The Fastest Synthesizable 32-Bit Risc Core
Latest News
- Cyient Semiconductors Secures Strategic Investment from GlobalFoundries
- JEDEC® Previews Next-Generation DDR6 DRAM: Higher Performance, Greater Capacity, Improved Power Efficiency and Data-Center-Class Reliability
- INTELPRO Adopts Andes AX46MPV Flagship Multicore Vector Processor and AndesAIRE™ AnDLA™ I370 to Power Next-Generation Heterogeneous AI and Robotics Solutions
- VeriSilicon Introduces Low-Power, High-Performance Wearable Subsystem Solution for Next-Generation AI/AR Glasses
- IC Manage Announces MCP Server for GDP-AI Design and IP Management System