Triad Semiconductor Introduces Three New Configurable High Voltage Mixed Signal ASICs
Winston-Salem, NC -- October 25, 2011 -- Triad Semiconductor Inc., the industry’s leading supplier of configurable mixed-signal ASICs, today announced the availability of a family of three new high-voltage via configurable arrays (VCAs). The new arrays, VCA-9, VCA-10, and VCA-11 enable the integration of high voltage analog, precision low voltage devices, digital functions and memory blocks into inexpensive single chip solutions. These new VCAs are fabricated on austriamicrosystem’s 0.35-micron H35 CMOS process optimized for high voltage mixed signal performance and digital integration. Applications such as high voltage analog filters, replacement of CPLD and analog designs, high voltage multi-channel data acquisition, sensor interface, high voltage actuators and power management can benefit from the mix of 3.3V, 5V, 10V and 20V resources available on these arrays.
“Many applications are seeing the need for higher voltages to interface with new sensors and provide improved noise immunity,” said Reid Wender, VP of Marketing at Triad Semiconductor. “These new VCAs are perfect companions for today’s low voltage processors and FPGAs that want to control high voltage resources cost effectively without risking damage to their sensitive deep sub-micron circuitry.” The VCA-9, VCA-10 and VCA-11 are based on Triad’s silicon-proven via-configurable array (VCA) technology, which allows designers to quickly and inexpensively customize analog and digital features with lower power consumption and greater system cost savings than previous ASIC solutions.
Technical Highlights
The VCA-9, VCA-10, and VCA-11 family of devices share similar analog and digital characteristics. The arrays provide a range of analog and digital capabilities with VCA-9 being the largest of the new arrays, VCA-10 smaller and VCA-11 the smallest of the three devices. This spread of capabilities allows designers to match their high voltage application to exactly the VCA that best fits their requirements thereby optimizing cost, package size and power consumption.
VCA-9 Technical Details
30 20V op-amps, 17 5V op-amps, 3,400+ 20V FETs, 3 12-bit ADCs, 2 10-bit DACs, 18.4K ASIC Gates, 24Kbits of SRAM, 78 20V analog I/O, 16 5V analog I/O, 46 digital I/O
VCA-10 Technical Details
3 20V op-amps, 48 5V op-amps, 2,200+ 20V FETs, 1 12-bit ADC, 2 10-bit DACs, 9.2K ASIC Gates, 12Kbits of SRAM, 50 20V analog I/O, 50 5V analog I/O, 31 digital I/O
VCA-11 Technical Details
3 20V op-amps, 40 5V op-amps, 1,650+ 20V FETs, 1 12-bit ADC, 2, 10-bit DACs, 6.9K ASIC Gates, 9Kbits of SRAM, 46 20V analog I/O, 42 5V analog I/O, 25 digital I/O
All of the analog and digital resources are arranged into tiles. A single Via-Only™ mask layer change configures and interconnects these analog and digital resources into a wide range of mixed signal circuits. If the design can be conceived of as an interconnection of op-amps, resistors, capacitors, logic and memory then the design can be implemented on a Triad VCA.
About Triad Semiconductor, Inc.
Triad Semiconductor, Inc., a privately held fabless semiconductor company with headquarters in Winston-Salem, North Carolina, develops and produces configurable mixed-signal ASICs. The company’s groundbreaking via-configurable array (VCA) technology delivers ASICs with silicon-proven analog and digital functions more quickly and at a lower cost than traditional full-custom approaches. Triad’s single-mask, Via-Only™ routing cuts engineering effort and fabrication time, resulting in fast-turn prototypes and allowing design changes to be made at minimal cost. For more information, please visit http://www.triadsemi.com or call (336) 774-2150.
Related Semiconductor IP
- MACsec Engine optimized for 10Base-T1S/T1L applications
- Dual Port, Voltage Scaling Register File Compiler on GF22FDX+
- Single Port, Voltage Scaling, High Speed SRAM Memory Compiler on GF22FDX+
- I3C Full Controller / Target
- I3C HCI Host Controller
Related News
- austriamicrosystems to manufacture Triad Semi mixed signal structured ASICs
- e2v selects new Cortus APS3 32-bit CPU core for sensor interface mixed signal ASICs
- Arasan Chip Systems appoints Director of Analog and Mixed Signal
- Microsemi Announces SmartFusion Intelligent Mixed Signal FPGAs Now Available with uClinux
Latest News
- Cyient Semiconductors Secures Strategic Investment from GlobalFoundries
- JEDEC® Previews Next-Generation DDR6 DRAM: Higher Performance, Greater Capacity, Improved Power Efficiency and Data-Center-Class Reliability
- INTELPRO Adopts Andes AX46MPV Flagship Multicore Vector Processor and AndesAIRE™ AnDLA™ I370 to Power Next-Generation Heterogeneous AI and Robotics Solutions
- VeriSilicon Introduces Low-Power, High-Performance Wearable Subsystem Solution for Next-Generation AI/AR Glasses
- IC Manage Announces MCP Server for GDP-AI Design and IP Management System