Atmel Introduces New 0.18 Micron Structured Array Family to Support High Density FPGA Conversions
Company Offers Strong Track Record in Short Conversion Lead Time and Reduced NRE
Nantes, France – April 20, 2005 . . . Atmel® Corporation (Nasdaq: ATML), a global leader in the development and fabrication of advanced semiconductor solutions, announced today the availability of the ATU18, a complete set of 0.18 micron structured array matrices to convert most FPGA/CPLDs with Atmel's Ultimate Logic Conversion (ULC), enabling significant cost savings for system makers.
With the ATU18 matrices, Atmel can handle up to 1,200 K-bits Dual Port RAM, 1,600K gates, PLLs, and Multipliers in a single chip. These memory blocks are compatible with embedded memory blocks from FPGA/CPLD makers Xilinx® and Altera®. The 51micron pad pitch allows significant reduction of die size even for high pin count conversions that are often pad limited. The Atmel ULC design flow has been improved to handle the latest FPGA architectures, resulting in a shorter conversion lead-time.
Atmel's ATU18 solution uses only wafer metal layers to configure the ULC, offering very low Non-Recurring Engineering (NRE) charges compared to solutions that require a full mask set. By removing the silicon area needed for programmability and implementing the memory in ULC memory blocks, Atmel can significantly reduce the size of the die and can bring up to 80 percent cost savings for the latest FPGAs with a pin-to-pin compatible offer.
With its 0.18 micron process, Atmel ULC's can support complexities equivalent to 8,000K FPGA gates. The ULC's internal frequency can be run at a much faster speed than that with conventional FPGAs, with at least 200 MHz. Power consumption can typically be 70 percent lower than its FPGA counterpart.
Gerard Bouvet, ULC Marketing Manager at Atmel, said, "Key industry players use FPGAs and CPLDs to reduce development cycle time in a wide range of applications but they have a lot of pressure from the market place to reduce manufacturing costs. Atmel's success in providing FPGA/CPLD conversions has benefited many companies from different market segments, including the data processing, consumer, digital imaging, industrial, automotive and military sectors."
The ATU18 structured array matrices are available for designs now. NRE are typically ranging from 60 to 120 K$. Price quotations may be obtained typically within 24 hours.
About Atmel
Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions. Focused on consumer, industrial, security, communications, computing and automotive markets, Atmel ICs can be found Everywhere You AreSM.
© Atmel Corporation 2005. All rights reserved. Atmel®, logo and combinations thereof is a registered trademark, and Everywhere You AreSM and others are the trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Information
Atmel's ATU18 product information may be retrieved at: http://www.atmel.com/dyn/products/product_card.asp?PN=ATU18
Related Semiconductor IP
- MACsec Engine optimized for 10Base-T1S/T1L applications
- Dual Port, Voltage Scaling Register File Compiler on GF22FDX+
- Single Port, Voltage Scaling, High Speed SRAM Memory Compiler on GF22FDX+
- I3C Full Controller / Target
- I3C HCI Host Controller
Related News
- Atmel Introduces New Embedded Memory Blocks to Support High Density FPGA Conversions
- Trebia Networks Successfully Performs LogicVision's At-Speed Debug on .18 Micron Prototype Storage Networking Chip
- AMIS Introduces a Higher Density Structured ASIC Product as Newest Member of XPressArray Family
- eASIC Announces Tape-out of First Structured ASIC Array
Latest News
- Cyient Semiconductors Secures Strategic Investment from GlobalFoundries
- JEDEC® Previews Next-Generation DDR6 DRAM: Higher Performance, Greater Capacity, Improved Power Efficiency and Data-Center-Class Reliability
- INTELPRO Adopts Andes AX46MPV Flagship Multicore Vector Processor and AndesAIRE™ AnDLA™ I370 to Power Next-Generation Heterogeneous AI and Robotics Solutions
- VeriSilicon Introduces Low-Power, High-Performance Wearable Subsystem Solution for Next-Generation AI/AR Glasses
- IC Manage Announces MCP Server for GDP-AI Design and IP Management System