Evatronix USB 2.0 Controller Secures USB Certification for Richnex High Speed USB Transceivers
Bielsko-Biala/Poland & Hsintien City/Taiwan -- January 18th, 2010 - The silicon Intellectual Property (IP) provider, Evatronix SA and the mixed signal IC design company Richnex announced today the successful USB certification of the Richnex USB transceiver - RN1170, in which the Evatronix USB High Speed On-The-Go Controller IP was implemented as a reference design.
âWe are pleased to see Evatronix High Speed USB OTG controller helped Richnex certify their product,â said Dariusz Kaczmarczyk, USB Product Line Manager. âOur entire line of USB controllers is USB-certified, with the USB 3.0 SuperSpeed controller pending the certification. We consider the fact of using our USB controller for the USB certification as the ultimate proof of the quality of the controller.â
" RN1170 is the only USB High Speed Transceiver IC that features an integrated charge pump capable of supplying 100mA current. With a compact 5mm x 5mm QFN package, it is ideal for embedded host or OTG applications in portable devices. Our complete line up of USB transceiver products including different packages and feature set are USB-IF certified and proven to work flawlessly with the Evatronix High Speed USB OTG controller." added Larry Huang from Richnex Microelectronics Corporation sales & marketing VP. About Richnex RN 1170 Transceiver
RN1170 is a high performance USB 2.0 transceiver chip which supports low speed (LS), full speed (FS) and high speed (HS) data rates as well as USB On-The-Go (OTG) modes. Its UTMI+ Low Pin Interface (ULPI) provides connection to LINK controllers while an additional CEA-2011 compliant I2C interface provides connection to non-ULPI LINK controllers. An up to 8KV HBM ESD protection circuit is implemented to the USB connection pins providing stronger ESD protection while reducing BOM at the same time. With a built-in 5V 100mA charge pump and a small foot print 40 pin QFN package, RN1170 is the most versatile solution for USB 2.0 OTG transceiver applications.About Evatronix USB High Speed On-The-Go Controller IP
The USBHS-OTG-SD controller from Evatronix provides USB Dual-role device interface that meets the 2.0 revision of the USB specification and On-The-Go supplement to the USB 2.0 specification. The controller supports both Host Negotiation and Session Request Protocols. The USBHS-OTG-SD, when set in the host mode, supports a single device operating at all USB speeds â low, full and high. When acting as a peripheral, the USB-OTG-SD supports full and high speed transfers.
The controller implements up to 15 IN and 15 OUT configurable endpoints, with all transfers supported by Endpoint 0. USBHS-OTG-SD implements either UTMI+ or ULPI interface for the transceiver and gives a choice of a 32-bit PVCI or AMBA® AHB system bus interfaces.
About Richnex
Richnex Microelectronics Corporation is a world class mixed signal IC design company and is a wholly owned subsidiary of Richtek Technology Corporation. Since its incorporation in January 2008, Richnex continues to develop new generation high performance, low cost mixed signal IC products while providing comprehensive, customized system solutions and supports. With its experienced and highly motivated management/research/development teams, Richnex strives to become âthe best mixed signal IC solution providerâ. For further information, please refer to www.richnex.com.
About Evatronix
Evatronix SA, founded in 1991 in Poland, develops electronic virtual components (IP cores) along with complementary software and supporting development environments. The company also provides electronic design services. Product lines cover a multitude of solutions from interface controllers and microprocessors to integrated System-on-Chip development platforms.
Evatronix IP cores are available directly or through the sales network of its strategic distribution partner, CAST, Inc.
Evatronix is headquartered in Bielsko-Biala, Poland, and employs over 75 engineers.
For more information about the company please visit the companyâs web site at www.evatronix-ip.com or contact Jacek Duda at +48322311171 ext. 22 or jacek.duda(at)evatronix-ip.com.
Related Semiconductor IP
- USB 3.x Controller
- USB 2.0 Controller
- Dual-Role Device Controller for USB 3.0
- Dual-Role Device Controller for USB 3.1
- USB 3.2 Controller IP
Related News
- GOWIN Semiconductor USB 2.0 PHY Interface and Device Controller IPs Achieve USB-IF Certification
- USB 3.1 Device & Host Controller IP Cores with highly configurable design for Superspeed data transfers in all kinds of advanced SoCs is available for immediate licensing
- USB 3.2 OTG Controller and PHY IP Cores for ultra-high speed, lossless data and power delivery are available for immediate licensing
- USB 4.0 Host and Device Controller IP Cores unleashing the Power of High-Speed Connectivity with tunnelling of Display Port and PCIe is now available for Licensing
Latest News
- Spectral Design and Test Inc. and BAE Systems Announce Collaboration in RHBD Memory IP Development
- VSORA and GUC Partner on Jotunn8 Datacenter AI Inference Processor
- Mixel MIPI IP Integrated into Automotive Radar Processors Supporting Safety-critical Applications
- GlobalFoundries and Navitas Semiconductor Partner to Accelerate U.S. GaN Technology and Manufacturing for AI Datacenters and Critical Power Applications
- VLSI EXPERT selects Innatera Spiking Neural Processors to build industry-led neuromorphic talent pool