Types of Storages for Computing System-On-Chips
We are living in an age where we generate the same amount of data each year that has been generated since antiquity. Ever wondered how and where these peta /exa/zetta bytes of data are stored?
Vendor:
Eureka Technology, Inc.
Category:
SD / eMMC Controller
SD/SDIO 3.0 Card Controller
SD/SDIO 3.0 Card Controller
Key features
- Compatible with SD/SDIO specification 3.0 with 1 and 4 bit data transfer.
- Option to support MMC 4.2 with 8-bit data width.
- Support SD, SPI and optional MMC bus protocol.
- Support standard capacity, high capacity (SDHC) and extended capacity (SDXC) memory cards.
- Support high speed and Ultra High Speed-I (UHS-I) modes including SDR25, SDR50, SDR104 and DDR50 bus speed.
- Up to maximum transfer rate of 104 Mbyte/sec.
- Simple 32-bit bus master interface to DMA data into user memory space.
- Selectable maximum block size from 512 to 16Kbytes.
- Each IO function includes up to 4096 bytes of data buffer.
- Process most commands automatically without user interference.
- Contains SD memory/SDIO standard slave register set.
- Hardware CRC generation and detection.
- Supports multi-function SDIO and SD Combo cards.
- Process SD 3.0 commands including speed class, tuning, voltage and block size control.
- Full CPRM security implementation.
- Password protection for SD cards.
- Options for AHB, APB, Wishbone, SH4, Avalon and Generic user interface.
- Options for interrupt-based user interface.
Block Diagram
EP563 block diagram
Specifications
Identity
Part Number
EP563
Vendor
Eureka Technology, Inc.
Type
Silicon IP
Files
Note: some files may require an NDA depending on provider policy.
Provider
HQ:
USA
Learn more about SD / eMMC Controller IP core
Virtual Prototyping Platform with Flash Memory
In this paper we will see how the flash memories developed using Carbon Model Studio helps to bring up an ARM® Cortex A7 flash memory sub-system with primary and secondary boot codes. Flash memories system demonstrated here can be used for early boot code and driver development for any CPU based SoC.
Allowing server-class storage in embedded applications
In this article, a new way to implement high performance data storage is presented, allowing the use of server-class storage technology in an embedded environment.
UFS Goes Mainstream
UniversalFlash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniPro as well as eMMC form factors to simplify adoption and development.
Universal Flash Storage: Mobilize Your Data
Universal Flash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniProSM as well as eMMC form factors to simplify adoption and development.
Frequently asked questions about SD / eMMC Controller IP cores
What is SD/SDIO 3.0 Card Controller?
SD/SDIO 3.0 Card Controller is a SD / eMMC Controller IP core from Eureka Technology, Inc. listed on Semi IP Hub.
How should engineers evaluate this SD / eMMC Controller?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this SD / eMMC Controller IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.